On to the NEXT issue….

[Don selleck]

bend the arm till it shows just under half, fill it, then see where its at, then run the gas out, with a gallon can in your trunk. trial and error, good luck.

 

[koosh]

bend the arm till it shows just under half, fill it, then see where its at, then run the gas out, with a gallon can in your trunk. trial and error, good luck.

Thanks!

 

[ruffcut]

Providing a link might be actual help, sir.

Oh, same comment directed at @ruffcut - especially since when I go to the Vans site and pull up sending units,
I don't see one listed for our b-bodies:
You searched for sending unit - Vans Auto
Maybe I'm just blind...

Hey Ed, I'm presently looking for the receipt for the part in question. Will post when or if I can find it. And if I'm wrong(which happens occasionally) I will admit it. I will post where I bought it. Dave

 

[moparedtn]

Hey Ed, I'm presently looking for the receipt for the part in question. Will post when or if I can find it. And if I'm wrong(which happens occasionally) I will admit it. I will post where I bought it. Dave

Thanks!

 

[ruffcut]

Thanks!

OK Ed. Couldn't find my invoice, but did find the info:
Vans Auto.com
SKU CHBSND683-N
68-70B Body
Sending Unit 3/8"
$50.00

Hope this helps others as well
Dave

 

[moparedtn]

OK Ed. Couldn't find my invoice, but did find the info:
Vans Auto.com
SKU CHBSND683-N
68-70B Body
Sending Unit 3/8"
$50.00

Hope this helps others as well
Dave

Thanks. The link:
https://vansauto.com/product/sending-unit-38-68-70-b-body/
It says something about being designed to work with "the aftermarket tanks" and that it might need modified
to work with stock tanks? I dunno.... Made in Taiwan.

This unit is also available at Roseville.

 

[ruffcut]

Thanks. The link:
Sending Unit 3/8" Mopar 1968 - 1970 B-Body
It says something about being designed to work with "the aftermarket tanks" and that it might need modified
to work with stock tanks? I dunno.... Made in Taiwan.

This unit is also available at Roseville.

Well Ed, all I can say is it works in the Stainless tank I also bought from them and it is working with the original gauge in the dash.
And I'm sure you know a lot of these parts are made off shore.
That's my 2 cents.
Dave