Portland, OR area...

[Jonnyuma]

I'm looking for some 15x7 steelies for some snow-tires. Nothing fancy, nothing expensive. Some take-offs from a C body would probably do the trick.
I also need to get some tires for em. Snow, M+S, smallish (28 or 29") all-terrain tires, doesn't really matter. Just need some booger-y-er tread than my Radial T/As offer.
I'll probably end up at a llantera or junkyard, but I thought this was worth a shot. If'n ya got a pile o rims, I got no problem diggin thru em. I'm in Troutdale/Gresham/Fairview/Whatever...east.

 

[Clay Dots]

just a heads up some c-body rims wont fit, be sure to measure.. best wishes CD

 

[greenmachine]

Try wildcat in sandy. Mopar yard with it all. Erik

 

[99ss]

^^ good call !

 

[Jonnyuma]

just a heads up some c-body rims wont fit, be sure to measure.. best wishes CD

Why would they not fit? Backspacing? The bolt pattern is the same, 5 on 4.5" just like pretty much all Mopars from what, 73 on up. Even 2wd 1/2t trucks and RamChargers got that pattern. I've even seen a Cordoba with the factory truck turbines (Prospector pkg, I think) on it (looks good, Old Tired Rebel, if yer still out there).

I'll definitely take some measurements before I lay my money down, but what am I missing?

- - - Updated - - -

Try wildcat in sandy. Mopar yard with it all. Erik

I've heard of that place, but have never been there. I've only been here (Portlandia) for a year and a half so I don't know where anything is except work, home, and the SpaceAge station that sells non-ethynol 92 :hello2:

I knew there had to be some Mopar cats in the area, thanks for the replies.

 

[greenmachine]

No problem. Wildcat is in sandy or. Bout 1/2 hour from Portland (depending on traffic). Light Ram parts on columbia might have or know of the wheels you need. Good luck.