Pt number / source for edelbrock fuel inlet fitting

[gtx6970]

Anyone know of a source for the fitting that screws into an edlebrock so i can use my stock prebent fuel lines.

Carb has a barb fitting on it now and runner hose.....which must go away.

 

[Darter6]

Edelbrock # 8090 Don't choke when you see the price !

 

[peabodyracin]

I found them on eBay more reasonably priced than I expected. Just have to look a bit and make sure you are getting the right thread. 1st one I ordered the seller sent me one for a Holley by mistake, but did take it back.

 

[RJRENTON]

Since you did not say the size of your fuel line....presumed to be 5/16" or the carb model CARTER or EDELBROCK, try this. www.carburetor-parts.com/Fittings_c_1580.html. you may find what you need.
BOB RENTON

 

[AR67GTX]

Did it have a Carter on it when you bought it? If so, you could remove the fuel fitting off the Carter and install it on the Edelbrock. That’s what I did for the years I ran an Edelbrock on my GTX.

edit: I think I misread your post. Appears it came with an Edelbrock with a barb fitting. I think any AFB or AVS fuel inlet fitting will screw in place of the barb fitting.

 

[RJRENTON]

Did it have a Carter on it when you bought it? If so, you could remove the fuel fitting off the Carter and install it on the Edelbrock. That’s what I did for the years I ran an Edelbrock on my GTX.

edit: I think I misread your post. Appears it came with an Edelbrock with a barb fitting. I think any AFB or AVS fuel inlet fitting will screw in place of the barb fitting.

The carb's inlet fitting is USUALLY a male inverted flare type but COULD be 5/16" or 3/8" line size. Likewise the carb's inlet fitting thread size, both diameter and threads/inch is specific to the carb's model.....and easy to cross thread...
BOB RENTON

 

[The Rebel]

Are you looking for something like this?

Carter AFB AVS TQ 5/8-20 Brass Fuel Inlet Fitting 5/16" Inverted Flare | eBay

 

[gtx6970]

Sorry for the late reply. been in the garage a lot since this one came home.

But , Yes . It has an edelbrock carb on it and I dont have the orig.
Ive ordered a new 5/16 fuel line and want to put the correct fitting in the carb to accept it

 

[gtx6970]

Are you looking for something like this?

Carter AFB AVS TQ 5/8-20 Brass Fuel Inlet Fitting 5/16" Inverted Flare | eBay

Thanks , thats it
Ordered it

 

[The Rebel]

Awesome! Glad I could help! Here's some pics of my project. See post 217
My 68 Charger - A Work In Progress | Page 11 | For B Bodies Only Classic Mopar Forum