6T8 Charger
Active Member
I got my 383 Charger running yesterday and noticed steam coming from the defrost vents. I knew that wasn't good. I let the motor run until the thermostat opened (which it did!) and then looked inside the car to see coolant dripping down from the heater box and puddling on bare floorboards (car had no carpet or interior installed). I don't see how I can replace the heater core without removing the entire box. I removed the heater control valve and the 4 nuts that secure the box to the firewall and it started to come out but if feels like something on driver side is hanging up and stopping it. I have removed much of the dash stuff like the glove box, gauge pod, heater controls, radio, etc. Any suggestions? TY