Rocker arms for 440 source stealth heads

[PolaraFury]

Hello,

I have a set of 440 source stealth heads and I was hoping to run the set of Proform 66868 rocker arms but they appear to be a bit short on the valve stem.

Any suggestions? I would like to stay 1.5 ratio, roller tip, and I don’t want to break the bank?

Thank you

 

[Frank Mopar]

Im running Comp Cams Pro Magnums. One of the things cheap isn't always better or just as good

 

[PolaraFury]

Are you running them on 440 source stealth heads?

 

[Frank Mopar]

Are you running them on 440 source stealth heads?

Yes I am.

 

[PolaraFury]

Yes I am.

Thank you

 

[1968rt]

Watch your pushrod clearance on the Stealths. 3/8" wont fit without modification and 5/16 are a crap shoot, check them!!

 

[PolaraFury]

Good Morning !
I Have A NEW IN BOX Set Of 440Source Alloy Rockers I Am Not Going To Use.

I Am Willing To Let You Have Them For The Current Sales Price As They List SHIPPED TO YOU>
I Eat The Tax & Ship.

In Nevada 89014
John
dodgeboy440@reagan.com

I DM you

 

[PolaraFury]

Is this set back too far on the valve tip?

 

[Xp29h]

Harland sharps on CNBC stealth heads work great. But may break the bank. They aren’t cheap! I had to pilfer a little (lot) of cash from the wife’s account!

 

[IQ52]

Is this set back too far on the valve tip?

View attachment 1109830

I think you should just take the time to digest this information.

http://www.b3racingengines.com/techcorner.asp

 

[PolaraFury]

I think you should just take the time to digest this information.

http://www.b3racingengines.com/techcorner.asp

Excellent information! Thank you