Satellite rear seat window cranks

[AR67GTX]

My car has smaller (shorter handle) cranks on the rear windows which I suspect are vent cranks off a 66 “C” body. But just to make sure Mother Plymouth didn’t do something weird in 66 I’ll ask the question - window crank handle lengths front and rear should be the same correct. My 67 has the same cranks front and rear.

 

[Jerry Hall]

https://www.ebay.com/itm/Mopar-63-6...2349624.m46890.l49286&mkrid=711-127632-2357-0
These are for the rear of a 66, slightly shorter than the 66 fronts, but not as short as the C body vent handle.

 

[AR67GTX]

Jerry - those are listed for 63, 64 and 65. But they used them in 66 too?

 

[Jerry Hall]

Yes

 

[Jerry Hall]

They should look exactly like your fronts, only a little shorter.

 

[AR67GTX]

OK - thanks. Another 66 vs 67 difference.

 

[Jerry Hall]

OK - thanks. Another 66 vs 67 difference.

Yes, 67 one year only window cranks.

 

[Ricky AKA Copper Dart]

1967 Satellite window crank handles are one year only?
Where are quality replacement ones sold? thanks
Copper

 

[AR67GTX]

Probably OER or PG Classics. They have been available awhile.

 

[gtx6970]

I just measured mine, and am fairly confident they are replacements. "THEY MIGHT " be NOS. They look to good to be originals. Previous owner was on a mission too use as much original/NOS parts as he could and avoid repops if at all possible


BUT,,,i would need to clarify with the previous owner to be sure .


BUT, fronts are 3-1/2" center to center length
Rears are 2-5/8" center to center length

 

[YY1]

66 rear cranks are shorter than the fronts...but...

there's no reason they need to be.

The machinations of the 66/67 rear windows require torque and those puny, short cranks struggle.

You absolutely can use the longer frons cranks for the rear, and operating the rear window becomes MUCH easier.