• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Started my 67 GTX body work/repaint

6_7_G_T_X

Well-Known Member
Local time
7:31 PM
Joined
Jan 28, 2014
Messages
59
Reaction score
84
Location
St Petersburg
Been a while since I've checked in,,,,
Taking my ride to a new level,,,trim is just about all off, media blast scheduled for Thursday. I will know what I have under those waves soon lol,,,
And now the part hunt begins,,,
As im always apprecitive of input on parts from those that have done this with the same year and model
Looking to replace all rubber, clips, scews,,,etc...
anyone know where I can find a headlight switch plug?
 

Attachments

  • 20151116_110729.jpg
    20151116_110729.jpg
    50.4 KB · Views: 581
  • 20151116_110854.jpg
    20151116_110854.jpg
    52.3 KB · Views: 632
Try: http://www.tonysparts.com/
This is Tony D'Agastino, he is well known in the mopar business.
He has a great web-site and it is user friendly.

I have purchased a few things from his business and I've been very satisfied.

Good luck with your 67 GTX project!
 
Nice car, Hope the quarters are in decent shape no one makes a decent wheel arch or full quarter. A little advice get the longest sanding block you can afford. Your gonna need it. lol

were I'm at:
IMG_0603.JPGIMG_0616.JPG
 
Yeah, I'm blocking out my 68-X right now and I bought every Durablock that they make! A gallon of "Slick Sand" and tons of 180 and 220 paper. Nice car!
 
Good luck with the project. Looks like it was a nice car to start with.
 
Nice car, Hope the quarters are in decent shape no one makes a decent wheel arch or full quarter. A little advice get the longest sanding block you can afford. Your gonna need it. lol

were I'm at:

2quick, been missin' ya on your thread... 6 7 G T X, I'm looking forward to seeing yours finished as well. As 2quick mentioned, no quarters are available, just small patch panels. If you need to replace your quarters, don't stoop down and buy Sherman panels either, you'll be sorry. You can try Mr. G's USA for the screws, clips, etc. My dad is restoring his '66 Satellite and got almost all the rubber from Legendary. Jim
 
ok,,today was interesting, ,had her wet media blasted,,took 4 hours,,and most of the paint and bondo stripped,,quarters suck,,not surprised,,20151119_120512.jpg20151119_120506.jpg20151119_120448.jpg20151119_120439.jpg20151119_120435.jpg20151119_120512.jpg20151119_120506.jpg20151119_120448.jpg20151119_120439.jpg20151119_120435.jpg
 
Very nice job! Now you know what you have. Now for the metal work. Good luck, and have fun.
 
wet media blasting is very similar to dry,,but way less messy,,there is a slurry that takes off the paint,,at a low pressure.
I hired a mobile guy,,came right to the shop,,
 
I was reading another post about a guy with the same problem as you. They are saying that if you can find a 67 four-door, and cut out what you need you'll be good to go. I guess the four-doors don't rust in the sameplace because the quarters are sealed off by the door jamb. Sounds like a great idea to me! Good luck with the repair. Love the pic's!
 
so what's the issue with sherman panels?
besides thinner and needing to be massaged to fit?
 
so what's the issue with sherman panels?
besides thinner and needing to be massaged to fit?

That's pretty much it, too thin and don't fit. And from all the experience I've seen they don't need massaged to fit, they need completely reworked to fit. Plus, being thinner even if they fit perfectly is enough to drive me away. I don't want my quarters "flapping in the wind" as I drive. One place I called about their panels they told me they were made by Sherman and even told me they were "cheesy", and definitely not restoration quality. A nice '67 GTX is that last thing I'd put them on.

- - - Updated - - -

Plus the thinner sheet metal makes it more difficult to weld to original sheet metal and also much more prone to warping. Just sayin'.......
 
update 1st shop visit since media blast

20151125_101455.jpg20151125_101437.jpg20151125_101422.jpg20151125_101405.jpg20151125_101349.jpg20151125_101329.jpg

I stopped in,,,paid the piper a bit,,took some pics,
I will be picking up all the bright work this weekend. After experimenting with one piece of stainless I have decided to tackle that myself.
Everyone have a safe and Happy Thanksgiving
God bless America

- - - Updated - - -

Whatever panel I use, we plan on just using the lower portion at the horizontal line that runs the length of the car. So im thinking its too small of an area to be flapping in the wind. At least I hope thats the case,if I can't find a whole panel,thens its going to be patch panels.
 
Auto Transport Service
Back
Top