The Surrogate Mother!

[chargervert]

Ordered new pressure plate bolts today.

 

[jamey]

What compression and camshaft in the hemi?

 

[chargervert]

Compression is 11 to 1 camshaft is the one that came with the Edelbrock 705 horsepower top end kit.

 

[6PKRTSE]

As they say. Once you go Hemi, you never go back. You either have a Hemi or you want a Hemi.

 

[chargervert]

I agree, my second Hemi engine is going to the machine shop the day after Thanksgiving.

 

[chargervert]

I thought I was going to have to buy 4 speed pedals for the car,but the car already has them in it! Winning! Today I am going to weld the torque arm bracket on the frame and the skid plate on the K frame because the Hemi oil pan is deeper than the 383 this car came with from the factory.

 

[Cheapsunglasses]

You either have a Hemi or you want a Hemi.

If you want to donate a hemi , I run a no kill shelter for gently used unwanted hemis , just send one over and I will do my best to give it a proper home

 

[chargervert]

The Hemi pound! lol! I welded the torque arm bracket and skidplate on.I put the clutch together with the new bolts and blue locktite no issues,going to install the bellhousing and transmission next.

 

[chargervert]

Set up the clutch and pressure plate, installed the bellhousing and throw out bearing and installed the transmission.

 

[chargervert]

I paid $900 for a rebuilt dual diaphragm brake booster with the offset brake booster mounting bracket for a Hemi about six years ago at Carlisle. I found the brake booster, but I cannot find the mounting bracket. I know that I have it,and I remember holding it in my hand about a year ago, but I just don't know where I put it! I guess if I have to buy another one I can use it on the other car that will be getting the other Hemi engine, but it sucks when you know that you have something and cannot find it!