Evil Bird
Member
4 speed with 8 3/4 rear. I have tried Spicer, Moog and Precision ujoints. They are all physically a bit bigger than the one i pulled and I can't get them in the driveshaft. Anyone else run into this problem?
The cross is bigger so it interfers when trying to slide it in.Bigger as in the cross section dimension? Or in the diameter of the caps?
Bigger as in the cross section dimension? Or in the diameter of the caps?
Yep, and the 7290 has 1.125" cap dia, think the 7260 has 1.063" caps7260 = 2 1/8 between ears
7290 = 2 5/8 between ears
If memory serves
Only two factory sizes that year for rear end.
Probably this.Probably a 1330 u-joint 1.0625 cup. 3.625" 66/67 Bb and Hemi's.