• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Weld Sport Forged Draglites fitment on 68-70 b body

TexasRoadRunner68

Well-Known Member
Local time
1:57 PM
Joined
Jul 24, 2013
Messages
546
Reaction score
203
Location
Dallas,Texas
Looking at buying some rims for my 70 charger. Would these wheels (5x4.5) in 15x10 with 5.5” backspacing for the rear and 15x8 with 4.5” backspacing up front fit properly? Looking to put about as wide a tire as I can fit under the back without mini tubs or excessive rubbing. Just wanted feedback before ordering.

I found some photos of these on a charger and like the look.
 
I bought a set of wheels of those dimensions from a guy who had them on a charger. He used 1/2" spacers all around. Not sure if that was for inner clearance or just for appearance. Personally I think 8" is too wide for the front unless you're going with an 18" wheel or something like that.
 
Auto Transport Service
Back
Top