• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Whats everyone working on?

1967 plymouth belvedere I am looking for a back bumper it's really hard to find so far thinking about getting my original one dipped I am also looking for the rear cross member that the bumper brackets bolt to owe and bumper brackets thinking I am going to have to fab all the rear cross member from scratch and photos on line
Isn't AMD repo'in 66/67 bumpers? take a look.
 
Getting ready to put the intake back on. I gave the valley pan a shot of paint so it can dry overnight.

image.jpg
 
1967 plymouth belvedere I am looking for a back bumper it's really hard to find so far thinking about getting my original one dipped I am also looking for the rear cross member that the bumper brackets bolt to owe and bumper brackets thinking I am going to have to fab all the rear cross member from scratch and photos on line
From photos on line I ment to say here is the belvedere it's rough but it will come around
Sweet man

Screenshot_20221026-195138_Facebook.jpg


Screenshot_20221026-195355_Facebook.jpg


Screenshot_20221026-195316_Facebook.jpg
 
Zero on the '66 unless you want their "production error" front bumper.

'67 they have fronts in stock and they sell a rear but NO STOCK .
No back bumpers there is one on ebay but holly man they want both arms hahaha
 
It will be 1200 to get it dipped and 13 week wait guess good things come with patience
 
Getting geared up to install the engine/trans in the Express. Also getting ready to put the glass in.

20230126_135154.jpg


20230126_135308.jpg


20230126_135458.jpg


20230126_135517.jpg


20230126_135603.jpg


20230126_135607.jpg


20230126_135628.jpg


20230126_135636.jpg


20230127_074448.jpg


20230127_110546.jpg
 
My lazy *** is still waiting to put in the second frame connector... This cold weather brings me to a dead stop
 
I can understand that. I am a hater on cold weather!!!
I have the connector all ground to fit, would take me bout 90 mins to finish, it's just a matter of wanting to get on my back on that cold cement again :)
 
Motor/Trans swap. Out with the Poly and in with the 383. Need to clean-up engine bay & repaint the color I want the car to be eventually and would like to rewire as well.

68574733820__B89AF0B2-59C7-42ED-9543-75DAAAEEF8ED.JPG


IMG_2169.PNG


IMG_2331.JPG


IMG_2332.jpg
 
Still working on the Dakota Digital project. I installed the harness I made. Now to tie it in.

20230312_165636.jpg
 
Just to get it going --- What is everone working on?
69 Coronet RT. I helped a buddy strip the car when we were 19 or 20 years old which would have been over 40 years ago. It was the common place in the small town Alberta to go drink a beer remove a few bolts and tell a few stories. Of course he moved away and left it in his dads garage. After a few years his father passed away and he had to clean out the garage. All the parts ended up in his basement in Nanaimo BC and the car body went to another buddies place and sat in the bush. My wife and I made a trip from Alberta to visit some relatives on Vancouver Island and I looked my buddy up. Had not seen him in 20+ years. I asked whatever came off the car and he said it was still sitting at our buddies place and all the parts were downstairs. After a week or so back at home I started thinking about doing a project as I had recently retired. I called him up and asked if he would sell the car. He said his wife was kind of anxious to get the basement cleaned out. We made a deal. The only thing missing were seats , engine and a few miscellaneous parts. There had been some kids do a number on the roof and windshield but it is coming back to life as my driver. It has a long ways to go but moving along. Will be 440 six pac. Efi original 4 sp with Dana60. It will have a QA1 tube k member with coil overs and rack and pinion steering as I have never done this before it has been a challenge but coming along.

86E1E85A-9903-474E-9D75-2DA86A793D21.jpeg


4513B162-122A-4645-857F-9093967303EA.jpeg


4109A9BF-6C1E-4AB8-B425-31E3E119985B.jpeg


E4D492C8-3C60-43FA-A813-BE09BB2ECA81.jpeg


4B0916FD-A29D-46FE-83A3-A568A0BD2979.jpeg


95E07861-4687-4176-9A87-D3B22093478F.jpeg


C647838D-321F-4434-8689-DD10838DE13B.jpeg
 
Auto Transport Service
Back
Top