Bb70charger500
Well-Known Member
Hey guys I'm not much of a eng guy I can rebuild them o.e.m. but changing stuff with performance parts I get a little iffy , I found some stuff for sale and wanted to know if it will work in my motor
Edelbrock 7177 Performer RPM Cam & Lifter kit. Dur 308/318, Lift 488 / 1.510 MOPAR small block
Edelbrock 5777 Sure Seat Valve Springs
Edelbrock 7176 Performer RPM Intake manifold Dual Plane Square Bore
Now for a little info it's a 72 340 that's had some work done (but not to shure of what)
I bought the intake because it has the stock one on it still I'll be running a 750 edelbrock carb , the car has roller rockers 1.5 (this is where I'm not shure ) and a cam (don't know the size ) its had head work done bigger valves (to duplicate 1970 340)The bottom end is all forged. So will this cam and lifters work in the motor with the roller rockers? And are the springs needed ? I think I have a list of eng internals somewhere I can go over it tomorrow,
Also how big is the cam is it going to be a pain in the *** ? Or ok for a driver ? The car is a 4 speed also and if needed the rear is 8 3/4 with a 3.55 shure grip .
Sorry If this is basic stuff (I'm a big truck mechanic) and don't really play with go fast stuff .
Thanks for any and all help
And if more info is needed please let me know
- - - Updated - - -
Also will I need diff push rods if they do work?
Edelbrock 7177 Performer RPM Cam & Lifter kit. Dur 308/318, Lift 488 / 1.510 MOPAR small block
Edelbrock 5777 Sure Seat Valve Springs
Edelbrock 7176 Performer RPM Intake manifold Dual Plane Square Bore
Now for a little info it's a 72 340 that's had some work done (but not to shure of what)
I bought the intake because it has the stock one on it still I'll be running a 750 edelbrock carb , the car has roller rockers 1.5 (this is where I'm not shure ) and a cam (don't know the size ) its had head work done bigger valves (to duplicate 1970 340)The bottom end is all forged. So will this cam and lifters work in the motor with the roller rockers? And are the springs needed ? I think I have a list of eng internals somewhere I can go over it tomorrow,
Also how big is the cam is it going to be a pain in the *** ? Or ok for a driver ? The car is a 4 speed also and if needed the rear is 8 3/4 with a 3.55 shure grip .
Sorry If this is basic stuff (I'm a big truck mechanic) and don't really play with go fast stuff .
Thanks for any and all help
And if more info is needed please let me know
- - - Updated - - -
Also will I need diff push rods if they do work?