nuteguy
Well-Known Member
I'm rebuilding my 440 right now and went with an Edelbrock top end kit. The builder who did my machine work recommended 80 wall pushrods so I called Edelbrock and asked for a length. I was told 9.125" so I ordered some from Jegs (http://www.jegs.com/i/Manley/660/25928-8/10002/-1). Now that I have finally gotten to put them in, they are too short. I tried my stock ones and they seemed to fit well with the stock rocker arms that I am using. I am going to return the pushrods that are too short. However, I measure the stock pushrods to be 9.25". On Jegs, COMP Cams has pushrods that are 9.300" which they say are the stock length (http://www.jegs.com/i/COMP-Cams/249/7923-16/10002/-1?parentProductId=).
What should I do? Also, are the tips on the COMP Cams pushrods above correct?
Thanks.
What should I do? Also, are the tips on the COMP Cams pushrods above correct?
Thanks.