- Local time
- 6:00 AM
- Joined
- Mar 10, 2010
- Messages
- 29,414
- Reaction score
- 50,721
- Location
- Hanover, Pennslyvania
gasket information.
I'm researching head gaskets with a 4.410 bore.
The smallest compressed thickness in a composition is .039, that gets me 9.34:1 cr
I can get a cometic @ .030 that gets me 9.5:1 cr (where I would like to be for the cam I'm useing) but they are $85.00 each.
I can not find the right, shim type gasket, with a 4.410 bore.
I like the idea of the composition gasket. Would the difference in compression be that much to notice when the cam recommends 9.5:1 cr?
I'm researching head gaskets with a 4.410 bore.
The smallest compressed thickness in a composition is .039, that gets me 9.34:1 cr
I can get a cometic @ .030 that gets me 9.5:1 cr (where I would like to be for the cam I'm useing) but they are $85.00 each.
I can not find the right, shim type gasket, with a 4.410 bore.
I like the idea of the composition gasket. Would the difference in compression be that much to notice when the cam recommends 9.5:1 cr?