Gentleman
Well-Known Member
Hi Members,
I would like to set up my exhaust system like factory correct and I need some help.
Engine 440 HP
I know that the pipes are 2 1/4"
http://www.accurateltd.com/H-Pipe-for-440-B-Body_p_158.html
For the mufflers there are hemi mufflers but i would like to have the original look with a little bit more "noise". Any ideas?
For the muffler hangers:
http://www.accurateltd.com/Hanger-B-body-Main-Support-Double-Loop-Design-ACC737Z_p_127.html
Tail pipes:
http://www.accurateltd.com/Tail-Pipes-pair-67-74-B-body-for-Tips_p_309.html
For the tip hangers:
http://www.accurateltd.com/Tip-Hangers-Charger-68-70-Pair_p_152.html
For the tips:
http://www.accurateltd.com/1968-70-Charger-Stainless-Tips-Pair_p_148.html
The bigges question is for the clamps.
are the Q clamps or the U clamps correct for a original apperance?
http://www.accurateltd.com/Q-Clamp-Zinc-Pair_p_278.html
http://www.accurateltd.com/Pair-of-Factory-Style-Zinc-Coated-Clamps_p_281.html
So I would like to hear your opinion about my set up and what kind of clamps are correct.
Thanks for your help guys!
I would like to set up my exhaust system like factory correct and I need some help.
Engine 440 HP
I know that the pipes are 2 1/4"
http://www.accurateltd.com/H-Pipe-for-440-B-Body_p_158.html
For the mufflers there are hemi mufflers but i would like to have the original look with a little bit more "noise". Any ideas?
For the muffler hangers:
http://www.accurateltd.com/Hanger-B-body-Main-Support-Double-Loop-Design-ACC737Z_p_127.html
Tail pipes:
http://www.accurateltd.com/Tail-Pipes-pair-67-74-B-body-for-Tips_p_309.html
For the tip hangers:
http://www.accurateltd.com/Tip-Hangers-Charger-68-70-Pair_p_152.html
For the tips:
http://www.accurateltd.com/1968-70-Charger-Stainless-Tips-Pair_p_148.html
The bigges question is for the clamps.
are the Q clamps or the U clamps correct for a original apperance?
http://www.accurateltd.com/Q-Clamp-Zinc-Pair_p_278.html
http://www.accurateltd.com/Pair-of-Factory-Style-Zinc-Coated-Clamps_p_281.html
So I would like to hear your opinion about my set up and what kind of clamps are correct.
Thanks for your help guys!