Texas charger 73
Well-Known Member
i have a Holley 3310 i want to put on my car.. never ran Holley and i see 90% of the fuel lines leak.. what's a good fuel line that don't leak and don't cost arm and a leg
i dodnt want any rubber line at all.... i need the feed line between the two bowls to my line coming from the fuel pump... but i have heard the chrome hard lines like Mr. Gasket, Spectra and even Holley, Summit and Jegs brand all leak or eventually break...What are we talking about, rubber hoses, the hard lines, lines that connect the bowls? I haven't had any issues with any of them leaking?
everyone i talk to that has Holley has had issues with fuel line leaking where it screws into the bowl.. i just want to purchase a fuel line that will seal good and i don't have to retighten all the time.. this will be my first holley... i have always had Edelbrock carburetors90% of them leak?
Huh?
So 9 out of ten guys here with a holley drive around leaking gas?
Again, huh?
i was looking at these ThreeI've had great luck with these, whether or not you can get them for yours?https://www.summitracing.com/parts/sum-220100b
I've never had a 3310 so I'm not sure what they have for fuel inlets, most of those dual inlet kits say 4150 or 4160. I've used the first and second one you posted, the second one I remember having an issue with, maybe the plating going to crap? If the one 91r/t shared is how yours is then yeah, make your own.. looks like standard flared lines? All of my carbs took the gasketed fuel inlets which made those kits more appealing.
I may buy me one Of these and just try it and see. They fairly cheap.Never in 40 years have I had a Holley feed line that leaked... this is a 3310..
View attachment 1188988
2 of those have a 8.80 center distance and one is 10". Which do you have?
Mine is a 4160. Has metering block and plate so I assume 8.802 of those have a 8.80 center distance and one is 10". Which do you have?
I'm using the same on a Quick Fuel.Never in 40 years have I had a Holley feed line that leaked... this is a 3310..
View attachment 1188988
is this holley brand or Mr Gasket?I'm using the same on a Quick Fuel.
View attachment 1189602