Welcome wagon for wagons

[Moparjack 489]

@Moparjack 489 Clean out your inbox!

Okay! Done

 

[ckessel]

The only Mopar wagon on the Power Tour West. Mine baby!

 

[Diewilde13]

Here is my little Wagon. Build with 361,727,8.3/4 sure grip

 

[Richard Cranium]

I'll take the bottom one....

 

[Derwud]

Welcome from Florida!

View attachment 1489564

View attachment 1489565

View attachment 1489566

View attachment 1489567

Welcome from Florida!







View attachment 1489567

Flip that Sway Bar above the Subframe.. I run a Hotchkis Sway bar, but I made 1 inch blocks and then put the Mounts on top of the blocks to get it out of the way.

 

[GASSR]

Nice! Anymore photo ****?

Well, here is a quick look from below ... exhaust is next.

 

[Dave6T4]

Well, here is a quick look from below ... exhaust is next.

View attachment 1923951

I can't get over how similar the underneath of your car looks like my friend, Bill's '63 Polara. Same Milodon deep pan; same big headers; same deep pan on transmission. His has 3" exhaust underneath. I was working under it today to hook up shift and park cables for the pushbutton 727. We took it for a spin after filling with fluid. It shifts great, but we could not get the kick down working. Also, park does not fully engage. So, a couple of minor adjustments to do. Too hot under there to do it today; we'll try again on Monday. I put a shift kit in it, and sealed it up better. It had been leaking pretty bad.