Belvedere408
Well-Known Member
- Local time
- 3:05 PM
- Joined
- Jan 25, 2023
- Messages
- 704
- Reaction score
- 1,433
- Location
- Springfield Oregon
Awesome glad it's running with no issues. If you post to YouTube you can copy the link here.
1967 Hemi GTX restoration
- Thread starter hemidart1
- Start date
hemidart1
Well-Known Member
The builder doing his stuff
hemidart1
Well-Known Member
- Local time
- 6:05 PM
- Joined
- Jan 29, 2018
- Messages
- 21,420
- Reaction score
- 67,725
- Location
- Midland Ontario, Canada
Love a guy that sets timing by ear and feel...
hemidart1
Well-Known Member
79 years old and won a Wally this year . Mopar guy for life
- Local time
- 6:05 PM
- Joined
- Jan 29, 2018
- Messages
- 21,420
- Reaction score
- 67,725
- Location
- Midland Ontario, Canada
I'm only 63 and been doing the same thing since I was 15.. couldn't afford a timing light ! LOL
hemidart1
Well-Known Member
Next step- took the booster off- for two reasons
1- we are going to check the valve lash one last time before the fenders go on
2- since I had to take the booster off to get at the valve covers- good reason to change the bushings on the pedal linkage
1- we are going to check the valve lash one last time before the fenders go on
2- since I had to take the booster off to get at the valve covers- good reason to change the bushings on the pedal linkage
hemidart1
Well-Known Member
Progress
hemidart1
Well-Known Member
Valve lash set, brake lever bushings changed and booster and master cylinder back on
Don’t want to be doing that too often! Ha
Now just need to set the idle
Don’t want to be doing that too often! Ha
Now just need to set the idle
Belvedere408
Well-Known Member
- Local time
- 3:05 PM
- Joined
- Jan 25, 2023
- Messages
- 704
- Reaction score
- 1,433
- Location
- Springfield Oregon
Is this an original redone one? Or repop thanks.
hemidart1
Well-Known Member
The cap is new- the base etc are original
Similar threads
- Locked
