• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Need help to choose right Radiator for 68 charger w/426 Hemi

Mopartank

Well-Known Member
Local time
12:33 AM
Joined
Feb 8, 2012
Messages
54
Reaction score
6
Location
new orleans, LA
Hi guys, I need a advice to choose right radiator for my hemi, I want to run it cool as possible in traffic. Thank you.
Specs
68 charger
426(472) 850 carb.
727 trans
 
Wizzard 3 row aluminum, make sure pump vanes are within .065 to back of housing. Use a Milodon Thermostat. Install a bleed petcock in block and also in top of Water pummmp. Clutch fan, with shroud. Blade edges must be 3/4 inside shroud and no more than 1/2 gap between blades and circumfriance of shroud opening. Skip all electric fans, make sure you have gaskets around underside of radiator to radiator support and top of Support to radiator.
 
Glenray is fan-freaking-tastic. I had a really nice 4 row aluminum (brand name withheld, but I paid $$$ for it and the fans) and my 440 always ran hot. The Glenray has been outstanding and I couldn't recommend it more than any other product I've used for a Mopar!
 
We've been a sponsor since the Winter and would like to offer B-Body members a special price to try out our products and report back here on the Forums. If you are interested, shoot me a PM or e-mail.

Chris
[email protected]
 
I went with a US radiators 4 row triple pass copper brass, Glen Ray actually spec'd it out for me but wasn't interested in building it. I had to order it through Classic Industries once I got the part number from US Radiators...it going in my 68 with a 572 hemi. Tim
 
Get ahold of Bob at Glenray. He will build you a factory appearing unit that will run cool.
 
I do have a used for less than one summer 4-core that fits a 66-70 B-Body copper/brass if you're interested.

Mike
 
Thank you guys for quick response. Cris, thanks for the offer, I ll check the web side and get back at you.
 
Took out a 26 inch inch stock tank with high efficiency core and bought an Afco 1 inch tube 3 pass for $200.Drove the car in the heat,160 stat and it was 180*
545ci blown hemi
 
I went with a US radiators 4 row triple pass copper brass, Glen Ray actually spec'd it out for me but wasn't interested in building it. I had to order it through Classic Industries once I got the part number from US Radiators...it going in my 68 with a 572 hemi. Tim

Thanks strange. I don't remember telling someone I didn't want to make a radiator for them...ever. Please tell me more.

Thanks,
Bob
Glen-Ray Radiators
 
BTW,I only changed to save weight.Also installed an aluminum driveshaft:thumbsup:

8.25.17 029.jpg 8.25.17 014.jpg 8.25.17 011.jpg
 
How much is a 26 inch aluminum radiator Ccas?
Our radiators are Polished, stamped tank all aluminum, lifetime warranty and 60 day cool guarantee and retail for $369 on our website. Shoot me a PM with your application. Year, model, Engine size, HP, Inlet/outlet configuration, AT/MT and whether you plan on using your original fan and shroud or if you want to go with electric fan/shroud kit. If we have a good match, I'd like to offer a couple of Forums members special pricing so you can report back to the members your experience with Cold Case.

Chris
 
Thanks Chris,I would be interested in a better,skinnier,lighter double fan.I have a pair of pushers due to lack of spce between the lower blower pulley and the radiator.
 
Auto Transport Service
Back
Top