Endangered Species
Well-Known Member
Hi guys, I need some insight. I'm going from the Elephant Ears to a Motor Plat and I made a new mid plate.
The motor sets perfectly level side to side. It's drops to the back 2 - 2 1/2 deg. which Equals about 1" drop.
The problem is my trans is still a little too high in the tunnel. Would taking it to 3 degree's hurt anything?
Thanks for your help!
Kevin
The motor sets perfectly level side to side. It's drops to the back 2 - 2 1/2 deg. which Equals about 1" drop.
The problem is my trans is still a little too high in the tunnel. Would taking it to 3 degree's hurt anything?
Thanks for your help!
Kevin