- Local time
- 5:23 AM
- Joined
- Jun 12, 2012
- Messages
- 35,211
- Reaction score
- 94,403
- Location
- NZ - just short of the South Pole
So please explain what is 'Safe' about that extra long cord.It is not stupid.
So please explain what is 'Safe' about that extra long cord.It is not stupid.
You need some 18V battery power tools.It is 12 gauge. Sometimes the power supply is 50 or more feet away from where I am working. I mostly frame roofs and rarely will you find a power box up there.
Using an extra long corded drill like that, you might be closer than you think.Uhhh...Not when I am this close to the end of this career.
I don't think you understand. THIS is the drill:Using an extra long corded drill like that, you might be closer than you think.
You need some 18V battery power tools.
What a dumb *** inspector. Orange outlet covers.I wouldn't worry about it let the guy in charge worry about it! You need the cord to do the job , I get you on the battery pack drills it's stupid doing real work with them . A corded drill is what you need ! Hell if you fall off a roof the 100ft of cord might catch and save you!
Kiwi mentioned a gear reduction drill screw them they will brake a hand ! This little thing ain't hurting anyone it would probably burn out before anything!
I had a safety guy come inspect the shop once a month he would write us up for stupid stuff ! But if you make it look legit he said nothing!
One time he said we needed to get orange outlet covers so people would know there were outlets there so they wouldn't stick there finger in them!!!
I got some orange spray paint sprayed the covers and a big arrow on wall that said no touchy!!!
I look at that box and see more than on code violation. The cord on the floor in a factory setting would be another.I was called out yesterday to an electric motor fault....dopey operator tripped over the cord, and said nothing to his colleagues. ...
In a bread crumb factory....previous guy left the second entry hole open, and terminal box was fill of flour. Fire waiting to happen.
View attachment 883004 View attachment 883005 View attachment 883006
Granted, it does need some work. It is a portable macerator effectively. Utilised in different parts of the small factory.I look at that box and see more than on code violation. The cord on the floor in a factory setting would be another.
No, that is a drill motor. A drill is what goes into the chuck.I don't think you understand. THIS is the drill:
View attachment 883007
If this gets stuck, what kind of damage would it do? It isn't a Hole Hawg, it is a weak 3/8" drill with no grab handle.
I need to know what the maximum length is for power cords connected to an electrical tool.
I am having trouble finding any information on this. I wired a 50 foot cord into a drill and nobody called me on it.
In every new circular saw that I get, I wire in a 100 foot TwistLock power cord. I don't like the thin and short cord they come with and I need the Twistlock pattern anyway. I've heard a few times over the years that the 100 foot cord is an OSHA violation but I can't find any evidence that it actually is. It my be buried in their regulations somewhere but I can't find it. I've heard just as many people say that it is NOT a violation so I don't know what to believe. Anyone know the truth or know where I can find it?