Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone know of a trick to get screws to tighten into a mildly stretched hole? I am trying to install the rear view mirror and visors in my RR now that the headliner is in and I have some screws that won't tighten down correctly.
Would you hunt high and low for a suitable "oversize" screw or...
Seems this 3M compound is unavailable, does anyone know of an alternative? Would a urethane product work okay with the rubber windshield gasket?
Maybe it doesn't matter. LOL:screwy:
Thanks
Hi Gang,
Does anyone have a trick up their sleeve to get these clips to hold in place? I have broken 3 of the new clips already. I don't have enough of the original to reuse.
Maybe a small pilot hole and put in a small screw? Any suggestions? I'm sure others have had some issues.
Thanks
Hello everyone,
I am installing my first headliner into my 70 Road Runner. So far so good, but I have been searching the web and message boards for information and photos of how the sail panels are installed. Do the sail panels go behind the headliner for 1970 or in front with the material glued...
Hello to ALL,
I am getting ready to cut in my carpet and was wondering if the rubber shifter boot should be fastened to the floor before the carpet and then the chrome ring. I have been searching and haven't found a discussion on it.
Thanks
Thinking maybe something like Fluid Film would work good on the pot metal frame vs. painting. I spent about an hour cleaning the 50yrs of crud off that piece.:usflag:
Hello to everyone,
I am cleaning up the rear window mechanism:luvplace: and was wondering what others do when installing the rails, slides and pot metal frame for the quarter glass. Should you just apply some oil to the frame and grease the rails for the guides? It seems painting wouldn't be a...