Search results for query: *

I recently got a replacement 1969 B body idler arm from PST. New arm is unlike the original in that it comes with a nylon lock nut to hold the bolt to the K frame. My question is, when I go to tighten the lock nut on the bolt, it's either loose or so tight you can barely move it. What am I...

Hi Folks, Does anyone offer a replacement lower steering column bearing for 1968-69 cars with automatic on the column shift ? All I am seeing form Classic Industries and others indicate the only one available is for a manual trans or auto floor shift car. Any ideas ? Thanks in advance, Rob

Ok, so I am into a 1969 Coronet front suspension rebuild. K frame painted and installed back in the car. LCA's rebuilt and ready for installation to K member. Upper control arms are just hanging-no upper arm bump stops installed yet, no shocks. I plan to install the LCA's, strut rods, and then...

Can someone please inform me of the correct paint color/finish of a 1969 power steering box? I'm pretty certain it is NOT bright blue like the one I just removed lol. Thanks, Rob

Ok, I am in need of some help here. I am working on a '69 Super Bee that was sent to me with no fuel lines. Question is, what determines if the car gets a vapor return line? Engine size, A/C, California emissions??? Thanks, Rob

Ok guys and girls. Here I have a factory 68-69 4bbl intake (casting # 2806301). Here is my issue, while dry fitting a Carter AVS to this intake, I noticed that there doesn't seem to be enough clearance for the factory choke stove. The (choke side) of the Carter appears to sit and cover the...

Ok, so who has any experience with disc brake conversion kits currently on the market? I see a bunch available, but are any of them good fit/quality? The Right Stuff has a kit, but it says it will only fit 15" wheels. Am I better off finding a different kit and keeping stock 14's ? There are...

Does anyone out there happen to have an extra set of 4 washers that go on the front suspension struts ? Need these for a 69 Super Bee. Let me know what you have/price. Thanks! Rob

Ok so does anyone know what the factory used for undercoating in 1968-69 ? More importantly, is there any product available today that looks close? I saw an episode of Graveyard Carz where they sprayed a B body, but of course they never said what the actual product was. Thanks! Rob

I'm sure someone out there can help. I have the front suspension/K frame out of a '69 Bee and am in the process of cleaning everything up. What are the correct factory colors for the K frame, control arms, torsion bars, steering linkage etc. ? Any help would be greatly appreciated! Thanks, Rob

Has anyone used a factory style repro upper control arm? Is the quality any good? Rebuilding front suspension on a '69 Bee, and wondering if I should replace upper arms with new, or put new bushings and ball joints in the factory arms. Any input would be appreciated. Thanks!!

Ok guys and girls, just checking to see if there is anything out there. Need a set of front buckets with tracks for a '68 B body. Headrests not necessary. I know these aren't cheap, but hopefully someone has something a bit more reasonable than what is on ebay. Thanks, Rob.

Hi folks, just wondering if anyone knows a place that might have full quarters still avail. for a '68 Coronet. AMD recently discontinued them due to being a "slow mover". I was told the dies are still in Taiwan, but they won't stamp anymore unless they get a run of 1000 pieces. Anyhow kind...

Hi there, I was just wondering if anyone out there can tell me if any bucket seat besides a 68-69 will work in my '68 Coronet ? I've heard that maybe A body seats are the same, or '67 Satellite buckets are the same with the exception of the flip lever for the seat back. Does anyone know the...

Hi guys. I recently posted here about fuel boiling, hot start issues on a '69 Charger 383. Due to the issues I was having with the Edelbrock Performer AVS and heat sink, I decided to swap it out for a Holley 4160 single pump, vacuum secondaries, and a dual fuel inlet. I went to mock up the...

Just wondering if anyone has experienced "hot start" problems with Edelbrock carbs? Subject car is a '69 Charger with a 383 and stock intake, no carb spacer. Engine cold starts fine, drives excellent. Issue is that after car is driven a few miles and shut off, it is hard to re start and the...

I'm looking for a complete set of Transmission kickdown linkage to go on a 383/727 auto trans. Need all 3 rods and bellcranks. Let me know what you have! Thanks, FBBO

Nice used original condition. Been sitting many years. Speedo works via cable. Condition of fuel, temp, and alt gauge unknown. Printed circuit looks good. Very complete. Includes bezel. Plastic chrome on bezel worn. Lens is nice and clear. $185 plus ship from Johnstown, Pa.

Good used hood latch assembly with rad support to grille panel and vertical support. Support has slight twist at bottom. Can be easily straightened. Latch is operable. $50 plus ship.

Good used red marker light. I believe this is a left rear. Part # on light is 3403575. Comes with housing retainer and speed nuts. Studs are perfect. Light scratches on red plastic lens. $30 plus ship.