Search results for query: *

Can I swap back to Tapered bearings if I am running Moser axles with The Green snap ring bearing on my 69 Charger with 8.75 rear axle? Are the bearings the same I.D.? Has any body tried this ?

Does anyone know what the actual size of the Idle restrictions are on a 69 sixpack carb that Holley is offering as replacement for the originals? Also what is the PVCR size ? This info seems to be very hard to come by. But is very important to most when properly tuning a Six pack . Let me go on...

Hello , I want get some opinion on the cam I am using currently and would I have been better off going with more upper Rpm range cam because of the motor specs. Here is the build 400 bb Mopar block 440 crank Ross pistons 1.730 deck height. 383 eagle rod Stealth heads with better valve job and...

Question for 69 b body owners who race the cars What are your alignment specs? Do you prefer to set left side body height Slightly higher to put weight on rear Right ? Please ride height and alignment Post your specs . Trying to dial in my 69 Bee .

Hi this might start some arguments Please not my intention. Just Ben out of the game for awhile Not sure if any good Mopar guys still around. Please list the good Mopar head porters near Chicago. Specifically with Indy head Experience. Thanks FBO .

Has anyone added Bile dots to 68 Charger tail lamps my Dad has 68 charger I want to do this to him for his Christmas Gift. What /who's dots did you use? Les see some awesome pics

Hello, I just wanted share my experience on this. I was doing a basic cleaning of a Holley 4150 750 Double pumper. In doing the cleaning process I sprayed carb cleaner in all the ports on the meter blocks . I see carb spray bubbling out pas the mixture needles on one of the four corners idle...

So two questions did the 68 chargers with column shift have the same dash harness as a Floor shift built car? I currently adding factory floor shifter and console and can not find the 4way plug that comes off the main harness in diagram for console light harness . Any body know if they have two...

Hello, Does anyone know how long tail stripes can be sitting on shelf before the are used? I have some that have been on top shelf in dark basement for ten to twelve years. Do I risk putting them on? Just took that long to get car build done.

I purchased this modern aluminum master cylinder from a known good ebay seller. I have questions about the outlet ports I have read the aluminum master cylinder has the port farther away from the fire wall is for the front brakes . Is that correct? If so that would be reversed from my cast iron...

Is there a thread on here for how to do a 3 point seat belt install in all years . Would this be a good one to add to form ?

I been working on cars since the 1980s I have never seen brand name oils seam so thin ? Like water thin? Seams like oil companya.are not giving you what you are buying . 10w30 was never like 0w20 wtf is going on?

Does anybody know if the total advance slots are still adjustable on the new Mopar performance distributor offerings? The distributor I bought about ten year's ago had the adjustable slots below the plates and you could easily limit total timing.. I . looking for new one for my friends 440.

I have a new/rebuilt passion 3speed wiper conversion tha I have recently got around to installing . It was a nice looking rebuild from Passion for mopars don't this Kim is around any more. I have a 3speed switch from her as well but I can not seam to make it work . Car was originally a two...

Hello, So I accidentally fried the pick up in my MP B eng distributor, Replaced with Store bought Stander ignition. Brand pick up . The alignment is not the same the MP one was centered on the reluctor tooth the replacement is sitting higher up and above about 1/8 inch up above the reluctor...

Does anyone have advise on where to find a nice replacement truck mat the last one I bought it is so thin and cheep It was like a shower curtain.

Could any one post or explain how the vent lines were installed and connected to the tank from the factory please . Putting together a super bee and floors have all been replaced and don't have the original vent pipes or floor gromets . Need to buy or make / fabricate. Thanks Cj

Not sure if this is the place to put this but, I have been working on getting my 9 year super bee project back on the road. And wanted to say the Darin , Rob, And Wes over at Mancini racing are good dudes and been very helpful at getting what I need and very fast at taking care of any ordering...

I am looking for a clean not rusty radiator core to k frame support bracket. Gos In of front k to under radiator in the middle for a coronet superbee. I think 68 to 69 charger is the same . Do not mind cleaning and painting the part .

Please help puting a new sixpack on and want to get the correct size and length bolts for the carbs. Orginal bolts missing. What size bolts 1 inch long or ???