Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey, Jim,
How's the sealing on your gas tank around the sender and pickup area doing? I like the idea of an EFI tank for future upgrade, but would value your opinion on whether its more trouble than its worth.
If you look in the clearance section on 440source, you will see mention of the old housing design. Is it going on ten years now(?) that they have been shipping the new design.
Just an FYI so that people can move on from dredging up stuff that's no longer accurate.
Beware, though, about...
Big Block pulleys.
Looking for these two specific pulleys. The AC crank pulley is the 4 groove pulley, and the associated water pump pulley has a smaller diameter than non-a/c cars.
Don't need rusty pieces.
Appreciate it!
I've been working on an upgrade of brakes myself and getting the bits myself. Like a lot of others - using the old Mopar action article and looking at the Mopar boards for updated information. Luckily I haven't been in a hurry as I run across things.
I will jump in and agree to buying a...
Mine is a low deck and I have the m1 single plane.
You will need a drop base air cleaner with a flat hood. Modelling clay is a good tip for estimating how much room you have.
Eddy's don't like fuel pressure much over 5-6. It's cheap to buy a regulator and gauge. I have stock fuel pumps that are putting out 7 and it causes all sorts of issues if not regulated...
I'm no expert. But it looks like you need new vinyl. Any spot repair wouldn't look right. Also, all the vinyl as a whole is probably on the verge of falling apart. Fix one spot, another spot falls/pulls apart.