Search results for query: *

I'm gathering parts for installing my headliner. What style shape is the dome light?, Round, Rectangle? Did Sedans have a dome light. Anyone have a photo.

Gathering up parts for installing my headliner. 1) What position do they get installed at? My hardtop was the shortest in front and longest in rear. Is a Sedan the same? 2) My hardtop had a spring on the back bow. Don't remember is there was one or two. Is the sedan the same? 3) My...

I need the headliner sail panels for my 1965 dodge Coronet 2 door sedan. I can't find anyone who sells them. Hardtop ones are readily available. If someone could send me a pattern. I could make them. Don

Got home a couple weeks ago after driving to the Amblewagon plant in Detroit to pick up my new 1965 Dodge Altered Wheelbase race car. As I got the last one they gave me the jigs for the front end modification. I noticed in the box they also had a jig for positioning the torsion bar anchors...

What the PN for the correct water temp sensor. I've been told TS-17, but looking on the web it seems its for TS-17 is for later years.

I install SS springs on my 65 Sedan and the drivers side sits higher by one inch. I always thought the passenger side would be higher. I have the # 456 ( has more leafs) on the passenger side and 457 on the drivers side. The car weights 3310 without driver. Also does the pinion angle change...

Will a later year (like 66-67-68) wiper arm fit a 1965 splined pivot shaft? Is the width at the bayonet end the same? I need a drivers side arm for my 65 Coronet. I understand the later year arms are longer. So, I was thinking to cut the end off of one and rebending it to match the length and...

Just got my rear original looking wheels. Got them from Wheel-Smith. Only took 5 days after ordering and they were on my doorstep. Great service. Got 7" backspacing to fit with my mini tubs and inboard springs.

I have a reproduction headliner for my 1965 Coronet 2 door hardtop. I already glued in the insulation and sail panel boards. I have all the bows and clips. I need someone in the phoenix area to help me install it.

Getting ready to cut the end off my 1965 Coronet steering shaft so I can lengthen it when I noticed a hole in the shaft. Its just over an 1/8" diameter and about as deep. My 66 is thy same. Whats it for?

Who sells individual pieces? I don't need a complete set. I just want the 4 inner door panel ones, plus one extra for the inner front door. .

How do I install a new firewall grommet on my e-brake cable? My original is not to bad, but I have a new reproduction one I wanted to install. The hole in the grommet is the size of the cable, But I need to get it over the bigger flange at the end of the cable. Is it possible to stretch the...

How do I reinstall the roof rail (drip rail) molding (trim) that's above the door? 1) I believe I install the clips into the molding them push onto the rail? If so, what's the trick to snapping them on? 2) I've seen post where people say there are 3 clips per side. I know my trim was original...

This wire retainer or clip is on the tail light harness. Where does it attach too on the body? Must be somewhere in the trunk.

I forgot (and I didn't take photos) how to run the wires that are behind the driver side kick panel. There are two black looms, an upper and lower. What wires run thru those. Does the door switch and dimmer switch run thru those? Some photos would be great.

Who sells these plastic nut inserts for the headlight adjusting screw? All the reproduction ones listed for a 65 Coronet's look completely different. I've seen Cheby ones that look like mine, but I don't know their actual dimensions to compare to mine. My screws are ok, just some of the...

Gathering up all the parts for installing my headliner. Noticed this clip. There is one on each side. What's it for? Coat hanger hooks??

Lost the front windshield outside molding (trim) clips. I bought some reproduction clips that were listed as as 1965, but they are smaller. Will they still work. Anyone have some originals.

When I tore the car apart there were 2 tabs-plates under the inter sill scuff plate on the drivers side. The passenger side were missing. I can't find them in the parts book. The screw holes in the body look like original factory holes, so I believe these are factory original. Any seen these...

Somehow lost the 2 little wires that hook onto the back headliner bow. When I tore the car apart I was afraid I would loose them, so put in a safe place. Now I can't find that safe place. I found later year one's for sale, but not 1965. Will later yerk ones work? Could I just make some out of...