Do you have the part # for the new mopar one you bought?
Sorry and where is it located on the engine?
Last edited:
3.9 spare for my Dakota
- Thread starter FU64RY
- Start date
Sorry and where is it located on the engine?
Slap Stick
Well-Known Member
On the back of the throttle body.
Thank you, just found it in my shop manual. So you have to work blind to get to it?
Slap Stick
Well-Known Member
Just disconnect the wire and one bolt on each side. Easy.
DON'T MOVE THE PINTLE!
DON'T MOVE THE PINTLE!
I feel for you, just got done doing the same only pulled a 5.9 from an RT and it was tight. Probably wouldn't have been as bad if I wasn't taking the harness with it and the truck wasn't so rusty! Now I have a pile of parts to sell or scrap lol.
SattyNoCar
Well-Known Member
- Local time
- 9:43 AM
- Joined
- Dec 13, 2013
- Messages
- 377
- Reaction score
- 647
- Location
- Between Houston and Galveston TX
I’ll give you the details later when I get home
SattyNoCar
Well-Known Member
- Local time
- 9:43 AM
- Joined
- Dec 13, 2013
- Messages
- 377
- Reaction score
- 647
- Location
- Between Houston and Galveston TX
(Let’s see if this works, copied my reply to another board........)
“The only place I could find an IAC was on ebay.
Here's the listing: Mopar 53030657AB Idle Air Control
Supposedly the last one they had in stock.
Got here sooner than estimated.
Local dealer didn't have one and couldn't get one. Knowing one was on ebay, I didn't argue with the dealer about it.”
“The only place I could find an IAC was on ebay.
Here's the listing: Mopar 53030657AB Idle Air Control
Supposedly the last one they had in stock.
Got here sooner than estimated.
Local dealer didn't have one and couldn't get one. Knowing one was on ebay, I didn't argue with the dealer about it.”
Morning thank you
Carid has one but the last letters are AD not AB.
They do have the AB but it's OE...not Mopar.
Similar threads
