'65 Manual Trans Crossmember Help

[Krooser]

I need to modify my stock auto crossmember to use my 833 trans.

I had the pix and specs for the modification but lost that info when my old phone died.

Anybody have what I need?

Thanks.

 

[493 Mike]

Save your auto crossmember, fabricate a new crossmember. My home made crossmember:

1/4" steel plate (or aluminum) with a spool type mount.
Mike

 

[max426]

I have a '65 4 speed crossmember if your interested.
Jim

 

[padam]

Save your auto crossmember, fabricate a new crossmember. My home made crossmember:
View attachment 1923234View attachment 1923235
1/4" steel plate (or aluminum) with a spool type mount.
Mike

That’s damn nice work!

 

[HEMI-ITIS]

Save your auto crossmember, fabricate a new crossmember. My home made crossmember:
View attachment 1923234View attachment 1923235
1/4" steel plate (or aluminum) with a spool type mount.
Mike

NICE BEAD!!

 

[matthon]

I don't have a pic or specs, but if it's anything like the 62:

I made a 4 speed crossmember by cutting the mount off the auto one, cutting out the center of the top, drilling a hole in the bottom for the stud of the new mount. Bought the single bottom stud trans mount, same as the one in my 67 bb a-body, the mounts with the 2 studs are hard to find and ridiculous $.

 

[T Brashears]

493 Mike,that's a nice simple,and strong looking crossmember!

 

[T Brashears]

I have a 2 stud USA polyurethane trans mount and a later poly spool mount that need homes cheap.