The Rebel
Well-Known Member
Friday night installed the exhaust tip hangers that I bought from a fellow member here.
Earlier in the week spayed the bolts down with penetrating oil to soak in. Took my drill wire brush and took off the undercoat & rust. Got the 1st bolt unscrewed & hit it with more oil & screwed it & unscrewed it working it in. Once it was off and then began on the other side.
Had the bolt 3/4 of the way down & snap! The nut inside the rail came undone and the bolt just spun around & around. If everything was easy everyone would be doing it, so I took some picture wire & wrapped it around the bolt & tab to at least attach it to the frame for the mean time. Any idea what I can do at this point?
Earlier in the week spayed the bolts down with penetrating oil to soak in. Took my drill wire brush and took off the undercoat & rust. Got the 1st bolt unscrewed & hit it with more oil & screwed it & unscrewed it working it in. Once it was off and then began on the other side.
Had the bolt 3/4 of the way down & snap! The nut inside the rail came undone and the bolt just spun around & around. If everything was easy everyone would be doing it, so I took some picture wire & wrapped it around the bolt & tab to at least attach it to the frame for the mean time. Any idea what I can do at this point?