71Charger
Well-Known Member
I’m replacing my fuel pump and carb on my charger and having difficulty locating a mech pump that will work with my edelbrock carb. I picked up a carter fuel pump that has correct inlet and out sizes, but it’s providing about 8psi which is way too much for the carb. It’s a thunder series carb can’t handle this and I don’t want to install a fuel regulator.
The fuel lines are 3/8, but can’t find anything that has the correct size in and outs with 6psi max pressure.
The fuel lines are 3/8, but can’t find anything that has the correct size in and outs with 6psi max pressure.