GEN III engine supplier

[McPorGuy]

I'm in the process of a restomod to a 1964 Dodge 330.

What vendors would you recommend for a GEN III Hemi. Either a crate, long block or DIY assembly. I prefer DIY if I can find a block, rotating assembly, prepped by a machine shop. Stpec are a very streetable 550-700 HP mated to Tremec 5sp.

Blueprint
Mopar OEM
Proformance
Mazzolini is not taking new orders
Modern muscle machines - Could support DIY engine assembly
Ray Barton -

 

[70chall440]

I bought a Mopar OEM 5.7 via JEGS, I did so because the price was good but I still had to wait on it.

 

[GTX JOHN]

My friend Bob Mazzolini is sick and has had his leg amputated.

Prayers Requested!

 

[Richard Cranium]

I bought a complete kit including a new 392 Hemi, transmission, clutch, bellhousing, QA1 front suspension, headers, computer, a/c, radiator, exhaust, etc from these people ....

Home - Bouchillon Performance Engineering

Bouchillon Performance Engineering - Specializing in Mopar geniune and custom engineered parts and accessories located in the low country of South Carolina.

www.bouchillonperformance.com

It wasn't cheap, and I'm sure they made a few extra bucks off of me, but not knowing what was involved with this kind of swap, I was clueless what was needed and knowing where to source parts from.

 

[ckessel]

Maybe check in with Troy at Glendora Dodge. Big time Mopar Performance dude.

 

[kiwigtx]

Blueprint

I would talk with @Johnny Mac - he is a Vendor here and FABO, and a member of several sites here. I use a BluePrint Engines stroker 408 and am very happy with it.
Been a site Vendor and member may get you a little extra discount or at least kudos.

He definitely will be there if you have any issues. BluePrint stand behind their products.

 

[GTX JOHN]

Maybe check in with Troy at Glendora Dodge. Big time Mopar Performance dude.

My friend Matt Deane is the Part Mgr. and Performance Specialist at Glendora.

I do not think I am allowed to post the 800 number.

 

[ckessel]

Matt was who I was thinking of. No clue where Troy came from. But for sure serious Mopar dude.

 

[Scott Engelhardt]

My friend Bob Mazzolini is sick and has had his leg amputated.

Prayers Requested!

Best of luck to your friend. Prayers for him.

 

[Mopar Hunter]

I was told about this place, seems like a pretty good deal.

Mopar 6.4L 392ci Hemi Crate Engine: SKU 68303090AC

Shop here for the 6.4L 392ci HEMI Crate Engine with 485 HP and 475 lb.-ft. torque. Includes water pump, flywheel, and more. Perfect for performance upgrades.

sdparts.com

 

[McPorGuy]

Thx.

 

[ckessel]

If you go to Spring Fling in two weekends, Glendora Dodge will be there, plus Milodon. You'll be able to get info from them and others.

 

[Budnicks]

https://www.arringtonengines.com/m-12-arrington-performance.html

shopHEMI.com
or any of Arrington Performance Hemi stuff, like 4-5 sites same owners/places

 

[rolling_Thunder]

I ended up building mine from a bare block i found on marketplace. It was significantly cheaper than the crate engines available - went with a 426 stroker kit and hellcat top end.

My machinist has my other 6.1L block all machined and ready to be assembled - I just havent prodded him to assemble the short block since i'm out in DC and he is back in SoCal.

 

[Nxcoupe]

I have 4 6.4 long blocks. I just got stroker cranks and rods for 2 of them

 

[MoparRobTX]

HHP Racing 6.7L 411ci 6.4L Based Stroker Forged Short Block HEMI Engine
HEMI Engine Program by MMX
DemonTKM Short Block