• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Getting ready to Instal 440 disguised as a Max Wedge in 63 B-body

super-bee_ski

FBBO Gold Member
FBBO Gold Member
Local time
10:52 PM
Joined
Nov 22, 2010
Messages
17,326
Reaction score
20,144
Location
Muroc Dry Lake Bed
Question is:
Is this the correct Schumacher Kit for the 440 in the 63 B-body?
Schumacher says it is, has anyone used this Kit?
Thanks,
Schumacher Creative Services

'62-65 B-Body Big Block Swap or Replacement Kit​

Regular price$189.00
 
Thanks Pigpen!
Looking into it as I am only 50 miles from 440 Source headquarters!
I almost think they are not for 40s, but I am researching it!
:thumbsup:
 
These are the rights and lefts for an early B Body. Pictures are from Kryslerkid I believe.
3EADF8B5-4EDF-4D4D-BE94-024791194DFA.jpeg
8A543651-10B8-4063-8B47-89256BF9490C.jpeg
 
Question is:
Is this the correct Schumacher Kit for the 440 in the 63 B-body?
Schumacher says it is, has anyone used this Kit?
Thanks,
Schumacher Creative Services

'62-65 B-Body Big Block Swap or Replacement Kit​

Regular price$189.00

What engine did your car originally have. Mine had a 361 and the 440 bolted right in.
 
Everything I've read states the k frame is the same 63+ weather it's bb or sb but it is the internet so....
Mine was a small block and has a bb in it, I just got new rubbers as a new motor is going in and I didn't change the k frame
 
This is correct. You might want to get the engine tie down for the drivers side as well as those rubber mounts are prone to tearing.
 
Yes, the 6 Cylinder and the 318 K-frames will not accommodate the 361, 383, 440s...
So Schumacher makes the adaption kit.
It is "on the way"
 
Auto Transport Service
Back
Top