HEMI-ITIS
STREETER on LI
- Local time
- 10:22 AM
- Joined
- Dec 14, 2008
- Messages
- 12,940
- Reaction score
- 17,811
- Location
- Long Island,New York
Took over 2 years to,,,,,,,,,,,,,,,,,, freshen engine & dyno,buy a pair of SV1 carbs to replace the 750's that were on there for 10 years,have Pro Torque make me a new torque converter and I installed a billit drum and CSI sheild in the 727,move into a new to me rental garage,and now start the reassembly of my heap.Life gets in the way sometimes and I also bought a new Hino rollback tow truck and started my own biz.This last Oct I found a deal on Dodge 2500 5.9 gas with a wastern plow only to have NO SNOW on Long Island this season.Oh well,always wanted me a pick-em-up:violent1:
Had the trans in & out a few times to see where massaging was needed for the CSI sheild,did that yesterday.Hung the trans in the tunnel with the crossmember and a strap under the trans IFO the new B&M aluminum trans pan.
Had the trans in & out a few times to see where massaging was needed for the CSI sheild,did that yesterday.Hung the trans in the tunnel with the crossmember and a strap under the trans IFO the new B&M aluminum trans pan.