Orange71SE
Well-Known Member
Hi guys, i am in the process of build a 440 RB, I currently have aluminum e street eddy heads and planning on using the .509 Purple flat tappet cam. I was wondering if anyone thinks i will encounter any valvetrain problems buy using Hughes 1.6 roller rockers? http://www.hughesengines.com/Index/...a2VyIEFybXMgJiBBY2Nlc3Nvcmllcw==&partid=26893
Sorry if this might seem like a noob question but this is my first time building an engine.
Sorry if this might seem like a noob question but this is my first time building an engine.