Road Grabber
Well-Known Member
- Local time
- 11:07 PM
- Joined
- Apr 14, 2020
- Messages
- 775
- Reaction score
- 188
- Location
- Sarasota Florida/NY State
I have a 383 out for repainting and fresh heads. I could use some feedback from those who have had success with engine paints.
I haven't had much luck with the VHT spray. Even with a fresh block washed and degreased engine block. Eventually it bubbles and flakes.
I met someone recently that did like the POR paint. I also saw a YouTube on epoxy engine paint?
What would you do if you had to paint an engine that could not be dipped because I am reusing the assembled short block?
Any advise for prep and paint?
Thanks in advance
I haven't had much luck with the VHT spray. Even with a fresh block washed and degreased engine block. Eventually it bubbles and flakes.
I met someone recently that did like the POR paint. I also saw a YouTube on epoxy engine paint?
What would you do if you had to paint an engine that could not be dipped because I am reusing the assembled short block?
Any advise for prep and paint?
Thanks in advance