• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Tremec 5 speed conversion in a 1970 Charger

The transmission mount has 2 carriage bolts that go through the crossmember. One was crooked when I pulled the mount from the box. When I straightened it, the meager weld broke loose.
SST 385.jpg
SST 386.jpg


I positioned the bolt and tacked welded it back into place.

SST 387.jpg

Test fit....A-OK.
SST 388.jpg
 
...fire up the engine and hold a file to that crankshaft while it spins....mill it down while in place...just don’t burn yourself on the headers



watermelon
 
FWIW .002 emery cloth might fix... .020 emery cloth ain't gonna fix..

You could machine the bore of the flywheel & honestly it's probably your best easy fix... But you won't want to use that flywheel in another crankshaft...
 
watermelon said:
...fire up the engine and hold a file to that crankshaft while it spins....mill it down while in place...just don’t burn yourself on the headers



watermelon
Click to expand...

How do you start an engine without a flywheel/ring gear for the starter?
 
1 Wild R/T said:
FWIW .002 emery cloth might fix... .020 emery cloth ain't gonna fix..

You could machine the bore of the flywheel & honestly it's probably your best easy fix... But you won't want to use that flywheel in another crankshaft...
Click to expand...
I'd be fine with that.
 
Before you look into any machining get a accurate measurement on that diameter... A set of calipers that read in .010 increments ain't gonna do it..
 
How about a Stanley Tape measure?
 
I'll have to buy something. Until now, I've never had the need for such precision instruments.
 
Why don't you buy one of these to really locate bellhousing. Your alright but it would bug me. I was able to borrow one from my maintenance dept at work. Cheap ones $35.
dail.JPG
 
I'd like to buy something locally so I don't have additional delays.
I have this....

SST 405.jpg


I can't tell how to read it though.

SST 406.jpg


I never went to school for this!

I will look into the dial calipers.
 
I am trying really hard to resist buying from those guys.
 
eldubb440 said:
looks looks .158 plus the size of the opening in the closed position...... if that is a 1"-2" mic, 1.158
Click to expand...

Since his calipers read 2.150 I'm gonna say 2-3". and since the thimble doesn't appear to be past the second line I'm thinking 2.148 not 2.158..
 
That was a random setting, not an actual measurement.
What I meant was, I don't understand the scale of these numbers. The dial shows 0-5-10-15-20 and back to zero. I don't understand a 0-25 scale as anything familiar.
 
Last edited:
Kern Dog said:
That was a random setting, not an actual measurement.
What I meant was, I don't understand the scale of these numbers. The dial shows 0-5-10-15-20 and back to zero. I don't understand a 0-24 scale as anything familiar.
Click to expand...

each visible line is .025.......one revolution gets you to the next line.....i never saw increments of .004 on the spinny thing, usually they are .001
 
You must log in or register to reply here.

Similar threads

fontleyroy
TKX 70 Charger
2 3
Replies
48
Views
8K
fontleyroy
fontleyroy
jobenz
Tuning a 489 cu in Gen II Crossram Hemi for the street
Replies
12
Views
1K
jobenz
jobenz
SteveSS
Changing a 727 to a 833 or a Tremec?
Replies
7
Views
1K
Krooser
Krooser
SeabeckRedneck
Which headers fit the bill?
2
Replies
25
Views
4K
SeabeckRedneck
SeabeckRedneck
RHDCharger
1967 Dodge Charger - Right Hand Drive - Update
Replies
2
Views
590
BeepBeepRR
BeepBeepRR
Auto Transport Service
Back
Top