• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What did you do to your Mopar today?

Drove it! Still holding out awhile longer before winter hibernation.
 
Honestly nothing, just walked by it in the garage as I was working out in the yard, taking advantage of the nice weather.
 
Took my girl out for a short drive. Perfect weather here in mid-MI today;sunny and low-60's. Too bad I have other responsibilities to deal with.
 
Finally

finally get to say this;Took It For A Drive Today. things are getting looser and feeling better. the tko tranny is shifting easier with each drive. the whole car is working good. found a couple of minor issues but nothing big, mostly wireing stuff.:headbang:

deer hunt starts tomorrow
 
repainted 2 battery trays and an air cleaner lid.
 
cleaned ,waxed,cleaned,waxed'get the picture now the other side-after that chased electrical gremlins
 
Drove my 63 about 100 miles today and hit the local cruise spot in the evening. Oh I love driving my car ! :hello2: Ron


coollowes.jpg
 
Adjusted the choke on the Edelbrock 650 Thunder series (AVS) on my Bee. The secondaries weren't opening so I assumed the choke wasn't opening as it should. They open now!. Man, this carb works so much better than the 750 that I was running (Eddy Performer). Took it out for short a test ride and kept going and going and going...kinda like the Energizer bunny. I did finally come home but it sure was fun.
 
Took the head-light bezels off and buffed them with the 124 compound, worked out great..
 
New rims and tires

So I pulled the gas tank off to get it cleaned and bought some new rims and tires off of ebay and it think they look good but dont have the white letters. Also buffed out the paint all except the drivers side the other day. Looking better and getting close to putting the windows back in. So this is a before and after pic. :headbang:
 

Attachments

  • PC130382.jpg
    PC130382.jpg
    127.8 KB · Views: 209
  • IMG_4629.jpg
    IMG_4629.jpg
    90.9 KB · Views: 202
Thanks and it has been a long time since it has looked this good. Can't wait to have to buy new tires after have fun with the car. Hope there will not be too many tickets......................
 
It broke my heart, but I went out to the garage and told it that my wife just does'nt understand our "special relationship" and that it would have to wait a little longer for that new 408 stroker motor



View attachment 48935
 
More like "What Am I Doing To My Mopar Today". Removing the carb/intake/blahblah to do the cam and lifter change. Hope to have the old cam and lifters out today;start on the install tomorrow. Great weather to work in;high 40's and minimal wind. Better day to be out driving,but work must be done.

Next...
 
Removed About 2 pounds of bondo from my 69 road runners rear LH quarter. You American's sure seem to love covering up poor repairs with lot of bondo. The repairs covered by the bondo were attached by what appears to be rivets. Now to start fabricating a replace section that will not require any bondo and to weld it in. Photos will follow
 
You must log in or register to reply here.

Similar threads

PlymCrazy
Finding the history on your vehicle, what did you do?
2 3
Replies
59
Views
5K
PlymCrazy
PlymCrazy
G
On Memorial Day
Replies
15
Views
1K
VANDAN
VANDAN
moparedtn
What did you learn about your Mopar today?
2 3
Replies
52
Views
5K
Pops1967GTX
Pops1967GTX
S
When did you start working on cars?
3 4 5
Replies
84
Views
8K
Builderguy
Builderguy
OG max wedge
What did you do to your 426 on 4/26/2015
Replies
2
Views
1K
rscurtis
R
Auto Transport Service
Back
Top