• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What did you do to your Mopar today?

Finally wired in the front lights. Thats 4 headlights, 2 side marker lights, 2 parking/turn signal, 2 top fender turn signal indicators, and finally two relay's. That's about 30 or 40 individual wires to route and fit, cut, strip, crimp, and shrink tube. Pain in the arse.
 
changed axle bearing and seals on the Barracuda took the 63 for a long ride. thanks Bob
 
after waxing my sons car he is selling, i started my 70 duster , 71 charger and 67 coronet let them warm up. then the fun part , drove each 1 of them to my friends house who lives on the block on the hill behind me and laid rubber in front of his house. when he gets home he'll know who did it and laugh. he has a sweet 70 gtx 440 6pak 4spd.
 
After a day in the garden and yard work looking at it, I hit the shower's and the road with a 70's music disk and ran some gas out on purpose. :)
 
I gots me a nice new shiny m/c with installation for $50. Can you say happy happy happy! 1149041_722466497766913_846654266_n.jpg
 
Ron 73 said:
After a day in the garden and yard work looking at it, I hit the shower's and the road with a 70's music disk and ran some gas out on purpose. :)
Click to expand...

"and ran some gas out on purpose." that sounds very selfish ron. lol good for you buddy. hope it was early 70's stuff.

- - - Updated - - -

drove the coronet down to the local watering hole for the weekly 50-50 draw and took a couple of spins around town. would of went over to the next town for a spin but i didn't win the draw and i was low on gas. lol
 
Drove the wife's 71 charger down the road to get a hair cut w/ my 5 year old daughter (she loves the car) and installed painted and rebuilt Upper Control Arms in my 71 charger.

The first of many new/rebuilt/refreshed suspension parts to come soon.
 
copper67440 said:
Drove it.
Click to expand...
That's what im talkin about..YA.!!.. good to see ya..
God Bless..Bear R.-......installed a new set of wiper arms and blades.mint condition..new set of Eaton Detriot leaf springs next month..."Hi Ron..good to see ya buddy"..
 

Attachments

  • $T2eC16V,!)kE9s4Z+z48BR9,QMHdHw~~60_57.jpg
    $T2eC16V,!)kE9s4Z+z48BR9,QMHdHw~~60_57.jpg
    41.5 KB · Views: 182
Took it to the Woodward Dream Cruise - and after that some therapudic blowing the carbon out on I-96.
 
I drove my 57 Belvedere down the New Jersey Turnpike and the fuel pump arm separated from the the pump and is inside the tiiming case.....No magnet is getting this one out. Time to pull the timing cover off and retrieve it...341 Hemi if your interested.
 
sublimegtx said:
I gots me a nice new shiny m/c with installation for $50. Can you say happy happy happy
Click to expand...

a little Phil Roberts/"Duck Dynasty" reference there ?? Happy Happy Happy
 
Worked on parting out a 67 Belv. II a 66 Belv.II and a 66 Belv I all four doors, turns out it's alot of work parting out cars and trying to keep track of everything and keep it organized.
 
Removed a voltage regulator (from Year One) that popped it's guts in less than 2 weeks on the car. Yeppers....I'll be a ringin' them good ole boys reeeeeel soon about that one :angryfire: Installed my cheapo temporary unit from Summit Racing, and it's all good to go again.
 
You must log in or register to reply here.

Similar threads

PlymCrazy
Finding the history on your vehicle, what did you do?
2 3
Replies
59
Views
5K
PlymCrazy
PlymCrazy
G
On Memorial Day
Replies
15
Views
1K
VANDAN
VANDAN
moparedtn
What did you learn about your Mopar today?
2 3
Replies
52
Views
5K
Pops1967GTX
Pops1967GTX
S
When did you start working on cars?
3 4 5
Replies
84
Views
8K
Builderguy
Builderguy
OG max wedge
What did you do to your 426 on 4/26/2015
Replies
2
Views
1K
rscurtis
R
Auto Transport Service
Back
Top