72 Satellite
Well-Known Member
When I turn on my signals, the fronts are correct and the rears are opposite. I'm sure it's something idiotically stupid on my part, but thought I'd ask in the event anyone else has experienced the same thing, or can give me some better troubleshooting tips.
I recently made several upgrades to the cars wiring, and that's when the issue appeared. Changes included all new harnesses except the dash harness. This included the turn signal switch/harness and the Ignition switch/harness as well. All new AutoMeter Gauges, which required splicing some of the original dash wires in with the new "Classic Dash" engine side harness. Since the Turn Signal switch/harness is "Plug & Play" with the original Dash Harness, I know I can't be at fault there. I guess I will have to verify if the new Turn Signal Switch harness has the rear indicator wires reversed? Everything else works lights-wise (Head lights, Tail lights, Brake & Reverse lights). All of the grounds are very solid. The only other thing of note is the Turn Signal Flasher and Hazard Flasher aren't working. I plan on changing those out as they look quite old and could have been damaged when I was re-doing the harness work. Thanks in advance for any tips or help.
I recently made several upgrades to the cars wiring, and that's when the issue appeared. Changes included all new harnesses except the dash harness. This included the turn signal switch/harness and the Ignition switch/harness as well. All new AutoMeter Gauges, which required splicing some of the original dash wires in with the new "Classic Dash" engine side harness. Since the Turn Signal switch/harness is "Plug & Play" with the original Dash Harness, I know I can't be at fault there. I guess I will have to verify if the new Turn Signal Switch harness has the rear indicator wires reversed? Everything else works lights-wise (Head lights, Tail lights, Brake & Reverse lights). All of the grounds are very solid. The only other thing of note is the Turn Signal Flasher and Hazard Flasher aren't working. I plan on changing those out as they look quite old and could have been damaged when I was re-doing the harness work. Thanks in advance for any tips or help.