What did you do to your Mopar today?

thehemikid said:

Sorry if this disappoints you but my A100 is a toasted roach now. It was in fair condition when I bought it 28 yrs ago, and can't find my pics of it from that time. It looked better then than now.

Drove it for about 10yrs, then it sat for about 15,..........outside, ....and it went down hill,... while working on other stuff. Brought it back into the shop about 5yrs ago to try'n get it somewhat out of the weather and get it running enough to move it out-n-in when needing to work to other projects. It's on the bottom of my Totem Pole of drivers, as far as condition I guess.

Probably should've left the Moss Patina on it. People would've probably though I found it that way, and ask is that a "Barn Find"?

I did that Steve Dulcich, Covid tank swab thingy a few yrs back . Gas tank was lined with crud so bad I put a spare Grasshopper mower fuel tank in the bed to be able to move it around on its own power. A little Road Kill...ish.

Got it dependable enough for short trips, with that 4.3 gal tank (X 2 later ) to where it lasted for 5 yrs till just a couple wks ago I posted where I put a new full Tank kit in it.

1st pic, when I drug it out'a da weeds. 2nd pic, not a good view but its current condition and my daily driver most of the time.

View attachment 1906824

View attachment 1906826

Click to expand...

I've seen way worse..... looks like a solid project for someone ...or yourself one day down the track a bit. Thanks for the story & pics.

Installed the new bumper, tail lights, rear wiring, etc. NOS tag bracket/fuel door too.

looks great!

RemCharger said:

I'll have to remember to take a pic of the wiring harness and ign work they did back in the day. It'd make for a great electrical post

Click to expand...

Forgot about this, but did get a pic. I don't think I'll bother posting it for Bob.

Last Saturday a buddy (in a 1 gen mustang) and I (in my 62 330) was on a "where did you and your car go today" cruise to eat. We decided to go eat after we put a vac gauge tune (the best we could) with a tad to big of a power valve on my 330. Well I only made it about 5-6 miles and the motor started loading up so bad that I was switching off the fuel pump try'n to keep it running for another 1/2 mile where there was a lot better place to get off the road,...and just barely accomplished that.

Popped the hood, pulled the breather, and those top pockets just outside the venturi's on a 1st gen dominator, were full of fuel! Yowza! Top of the rear fuel bowl and all over the back of the motor too. If it had caught fire, it would've been bad. I do carry a fire extinguisher,...and have stayed at a Holiday Inn once,... but that probably wouldn't of helped.

The front bowl (site glass) still had fuel but the rear bowl looked empty. Pulled that bowl and saw the white plastic float was almost full of fuel. Realized right quick,...wish I'd swapped the brass ones in instead.

Had to make a hard decision,...call a rollback or leave the car alone for about 15-20 minutes. That was a hard 20 minutes for me! Buddy drove me home, grabbed another Dominator that I knew had good brass floats and back on the road. We just got roll'n when he got a ph call from his brother about my car sitting by itself and knew that wasn't right turned around and pulled in to help. My ph rings with another friend noticing the same and the truck sitting there too with my car. He pulls in and finds out they"re friends from way back too. Small world sure helps ease the mind till I get there.

Changed the rear float, went to eat, plugs weren't getting over the ordeal tho so drove it home. Live to fight another day.

Found the leak, a crack perpendicular to the seam on the pivot side.

I got most of the front end assemblies up in there today. The only thing missing here now is the steering linkage and the sway bar, but that'll be coming up here pretty soon.



Almost ready to put the rear axle assembly up as well.
I need to put some fluid in it and put some brake lines on it first however.

Replaced the factory HID headlight bulbs in my 2014 Grand Cherokee today.

What a pain in the ***.

Glad I only have to do it every 109,000 miles....

Slow day... Calipers and Drums cleaned up and Painted.

Picked up some much needed trim ,and glass for my road runner

67 Mopar said:

Slow day... Calipers and Drums cleaned up and Painted.

View attachment 1909031

View attachment 1909032

Click to expand...

Tell us about those crossed drilled drums, I haven't seen any in years but have always wondered if it was worth it