Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know this has been discussed in the past but my computer crashed :mad: I have lost my complete directory of parts sources and I cannot find what I am looking for in the B bodies search engine.
I need to install a 66 or later 727 tranny in my 65 Dodge Coronet and want to retain my stock...
I need to get a Cross Ram Intake, 2 Holley Carbs, Hemi stock exhaust manifolds, Hemi Valve Covers and various support parts up to FHO / Tim Banning in Ontario for my Hemi build and really have no clue on the best way to go about it. Would anybody with some knowledge of getting the parts across...
My KB Hemi block has been built and sent to Tim Banning at FHO (2 month turn around from order to shipped) to be machined and put together. Just wanted to pass this info. on to the Mopar community as KB has had problems in the past but seems to be back on track. Tim at FHO is one of the best...
I am having Tim at FHO in Bewdley Ontario build my Hemi for my 65 Coronet and need some information from anybody with US to Canada crossing.
I have a crossram intake, Holley carbs and a few other parts I need to take up to him next fall and I need to know is it hard to get them through customs...
https://emailmarketing.secureserver.net/p/520ac9?fe=1&pact=42500-138225413-8811228321-3399f0abca3b50ef8d626813fb125306bfc9d538
Did not see the other thread on this....sorry my bad. :BangHead:
Having my 65 Coronet mini tubbed and Dana 60 installed, looking at about 1/2" of clearance on each side, is that going to suffice without a panhard bar to hold it more firmly? Rear will be up approx. 2" when Dana is installed which might increase clearance some, just looking for real world...
I am having my 65 Coronet mini tubbed and a Dana 60 installed and was planning on 4.10 gears and a Gear Vendors overdrive but unfortunately I don't think I can afford the Gear Vendors unit. I have a 572 Hemi with a 727 automatic tranny (not installed yet) and really need some advice on what gear...
I ordered a steel hood scoop 2 years ago from Joey Cole aka The Tyne Man and up until a month ago I thought I had been ripped off. I received a text from Joey and a picture of my nearly completed scoop. It looks like a wonderful example of the work I had been told he does and I just wanted to...
I bought a March Serpentine pulley kit for my Hemi install and now I am looking to order an alternator from Flaming River. Are all pulleys (v belt, double v belt and serpentine) the same as far as mounting on the alternator? I want to order my alternator without any pulley and just put my March...
Looking for a stock looking Alternator around 150 amps, does anybody have any experience with Flaming River and their Billet Alternators? Tried to search the Forums but it seems I can never find a darn thing when I need it. Thanks for any advice you got...
Saw this and thought what the....
http://www.streetlegaltv.com/features/car-features/the-tale-of-hemi-stang-half-daytona-half-fastback-all-original/?utm_source=rss&utm_medium=rss&utm_campaign=the-tale-of-hemi-stang-half-daytona-half-fastback-all-original
My March Serpentine pulley for the water pump is thicker then stock pulleys where it bolts on to the pump which is fine if I were using electric fans but I want to use my Viscous Hemi fan set up and the fan doesn't catch a lot of the center pilot on the pump (about 1/16"). Can the mounting face...
I recently ordered and received a Melling M63HV oil pump threw a discount parts shop and the box was a little beat up (not Mellings fault) and the gasket kit included was damaged and unusuable. I contacted Melling and within 3 days received not only 1 but 2 gasket kits, 10 note books, 2 multi...
I have an Edelbrock Victor Series mechanical water pump that I was trying to bench fit my March serpentine waterpump pulley and Hayden vicous fan set up. My problem is when the pulley is fitted there isn't much room left to fit the clutch fan setup. Exactly how much of the waterpump shaft should...
I can't find a new Mopar Viscous Fan Package because they stopped making them so I bought a used one on ebay. The problem I have is one of the blades has a tiny kink along the one edge and I wanted to know if I straighten it (which I believe I can easily do) will it be okay or am I better to...
I ordered a hand made steel hood scoop (paid in advance because he was highly recommended) for my 65 Dodge Coronet from Joey Cole and it has been 17 months and now I can't get a hold of him. My computer crashed and I lost his address (I think he was someplace in Michigan), also his email and...
Thought this video from Mark Williams Enterprises was interesting.
https://www.youtube.com/watch?feature=player_embedded&v=cR3Zey9ZiXE
Sorry if it's been posted before.