Search results for query: *

Is there anything out there (reducer, bushing) that will fit onto a 15" steel rim that will accept a 14" size hub cap? I have some 14" stock 1968 stock Satellite two piece caps never used. But I have to convert to a 15" wheel for my 66 Satellite.

Just installed some torsion bars from Firm Feel for a 1966 Satellite. Stock bars are 41 1/8" long Firm Feel bars 40 7/8" long I have a 1/2" gap from the end of the bars to the clip at the frame mount when completely flush installed into the lower A arm. The bars slide with no load, when I put a...

Need both left and right 10"x2 2/1/2" rear brake plates for a 1966 Satellite. Could also use some hardware.

Removed my stock leaf springs 5 leaf off 1966 Satellite. Installed new springs that are 6 leaf driver side and 7 leaf passenger side. My old shocks due fit with the extended length to the shock plate with the added leafs. But these old shocks ( Montgomery Ward ) are of course toast They measure...

Not sure, are these shackles for a big block for a 1966 Satellite.

I need to replace my after market funky shackles with some stock HD shackles for a 440. Possible U bolts and complete parking brake line from the junction to the passenger side, J hook for the fuel tank strap.

What is the difference between a 2 barrel and four barrel transmission. Was on Paul Herd motor book and matched the #3515845. A727B Fits 1971 E and B bodies two barrel. The next #3515846. A727B Fits 1971 four barrel E and B bodies. Trying to match a 1969 440 with the proper transmission that...

Will 10" x 2 1/2" rear brake drum with 2 1/2" shoes fit on 1966 Satellite. Comes stock with 10" x 1 3/4" drum and shoes. These were given to me. The drum seems to fit ok.

Any referrals for a car transport company. Looking for a enclosed trailer to move 1968 Barracuda and 1966 Satellite. I've talked and have got quotes with a few online and just feel very uncomfortable using any of the them. Leaving California to Oklahoma in two months. Thx Chris

Found the parts. Thanks for helping.

I have some good interior parts l need to go asap. I'm located in Rescue CA 95672. Just wondering if anyone in Northern CA. could use these items. Pick up only, as these are large items. All original used parts good driver stuff, not junk. Like to sell as a package for cheap. $300.00 for...

I have an option to purchase a 1968 383 complete rebuild long block out of a Road Runner .60 over. Been on a stand in a shop since 2003. Anything I should be concerned about. Possibility of seals, gaskets that might start to harden? Has been covered in plastic with no rust at all. The shop does...

I have several original interior parts in good condition that I need to sell. I'm located in Rescue Northern California and some of these parts are just to big to ship. Would be a great deal to purchase as a lot for a local pick up. 1966 door and back panels, front door panel chrome molding...

Just want to be sure that I have the proper mounting for the engine stand. Using the top two 3/8" threaded with grade 8 bolts and the two lower 7/16" non thread with grade 8 bolts and nuts. My concern is the lower driver side mount ( starter) strong enough as the block has the cast cut out for...

The car did not come with a front or rear sway bars. Like to install, but have no idea on the front sway bar where to connect. I do have one on my 1968 Barracuda and have it mounted to the lower control arm. No mounts on the Satellite control arm or even its that's the mount area. Picture of...

The car was a roller when purchased. The previous owner rebuilt the front end and installed used spinals, I think off a Cordoba and not sure. Anyways I install the rotors (single piston) that came with the car and they fit nice with 14" steel wheels. I have around 1/4" clearance from the out...

Proper way to install drip rail molding on my 1966 Satellite. I have looked on YouTube and most are full sized molding installations, not the separate three piece molding on B bodies. The car has been repainted and the area for the molding was not masked off. So paint build up will be a problem...

What does the letter E before the 440 on the top block plate stand for. Was told that this is out of a 1969 Charger. Seller doesn't know the casting number. I'll have to check it out myself. Engine is about 1 hr away, just trying to save time.

Have a chance to pickup a engine casting #2128854-1. Checked the casting # online and it states 361 or 383 year 1964 came out of a 1965 Satellite. I have a 1966 Satellite which had I think the 361/383 not sure as the car did not come with a engine. It's a B block and really not sure if this is a...

New Legendary rear convertible pearl white seat covers. These came with the car that was a roller with boxes of new interior parts ready to be installed that I purchased in 2017 that has been in storage since 2006. The previous owner never check the box with the seat covers. The front buckets I...