Search results for query: *

Looking to remove the bezel from my Charger and send out for refinishing. Once radio and other switches are cleared does the steering wheel have to come off?

Need to replace the bulkhead connector on my '73 Charger and will be replacing the female terminals in the connector at each position. Does anyone one know where I can find the gauge wire for each position on the bulkhead connector? Want to make sure I buy the correct gauge wire female spade...

I am rebuilding/restoring the heater box on my '73 Charger wan to paint the outside to eliminate the scuffs and scratches. Can't tell if the material is a plastic type with infused fibers, phenolic, or fiberglass. Just trying to make sure whatever paint I use is compatible and will adhered to...

Does anyone know the difference between a '72 and '73 positive battery cable for a Charger with a 440? Can't find anyone that sells the original style one for a '73 at a reasonable price. Found one for a '73/74 on ebay but it was over $200. Found several sources online for a 1972 440 in a...

Has anyone done there own restoration on one of these simulated wood grain tri-vents? Specifically, removing and then successfully reinstalling the double vent? Was going to send it out for restoration until I got the quote which was just under $1200. I decided I would try myself. I can get the...

Looking to buy several j-nuts that will work in a 1973 Dodge B body heater box. It seems to be an unusual size. It needs to fit a thickness of approximately .100 to .140 inch and have a hole to edge distance of approx .525 inch. I don't know that width and length matter but for reference the...

I have a '73 Charger with A/C and the heater box rear housing(half that faces passenger seat) of my heater box is cracked. The part number on the housing half is 3441978. Looking to see if someone has a parts box with an intact rear housing of the same part number or even a complete and intact...

Looking to buy a set of 15x7's and 15x8's. Lots of sellers out there. Looking for any experience relative to chrome plating, black paint, roundness, and balancing quality. Any clear Mfg winners today? Lots of stuff written about years past but not to much after the pandemic.

Looking for any help or any past experience identifying the brown color on the simulated wood grain 1971-1974 Rallye Dash and passenger side vent insert. I believe the original paint was a laquer PPG color, "brown suede" but am having trouble locating a source for the paint color or even a...

Looking for a drivers side vent assembly. Please PM me if you have one you will sell. Thanks.

Looking to buy an overflow bottle for my 1973 Charger. Please PM me if you have one for a ‘73 or ‘74 b body.

Looking to buy the heat shield shown in picture below. Please PM me if you have one. Thanks

Prior to buying my Charger someone had replaced the fuel tank and sending unit. The sending unit they used has a straight-in fuel line and a return line. The original had a 90 degree bend in the fuel line and the return line so the ground strap could be used on the fuel line. They used rubber...

Looking to replace my old unit with a new heater core. Prices online have a big range from less than $100 to $200+. All are advertised as copper and brass. Don’t know if the extent of copper use varies or differences in quality explain why such a big range. Does anyone have a recommendation on...

Looking to buy some Magnum 500 style series 54 rims on JEGS for my '73 Charger. Want to go with 275/60R15 on back and 235/60R15 on front. Anybody use this combo on a 71-74 Charger and will they fit okay without rubbing and without jacking the back end up. Want to keep the stock suspension height...

I want to replace the charcoal canister in my ‘73 Charger. Don’t need the original style. Just want one that satisfies the function. I have seen some online but most appear to be taller than the original so I am concerned with possible interference issues. Has anyone had any experience replacing...

Two questions I'm looking for help answering, 1. How do you check the radio noise suppressor with a multimeter? Is it a capacitance test? 2. I am replacing the factory AM radio with a factory AM/FM stereo radio in my Charger. I have read you only need a suppressor for AM because FM radios have...

Building my 440 for street and highway cruising. Pushing 400 HP, nothing to radical. Any real advantage to using shorty headers headers vs. the current stock manifolds?

Can someone tell me what size wrench will fit the hose nut and the evaporator side nut. Couple of my larger size box wrenches must have walked away and I need to get new ones.

Can anyone tell me if the underside hood insulation that fits a standard 1973 Charger hood is the same for the power bulge hood? I see a lot of insulation pads advertised on-line but none of them mention fitting the power bulge hood.