Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
See attached picture. According to the service manual this line is the intermediate filling vent tube, connected with a keystone clamp.
When I gas up, fuel leaks from this connector.
Do I just replace the connector or is something else going on?
I replaced the drivers rear wheel cylinder and tried to bleed it with a vacuum pump. But I still have air in the line.
I'll try again, but what is this device on the rear axle housing? See arrow...
Does this prevent vacuum bleeding or do I need to use the "pump the brakes and open the...
I have Weld draglites and I have Weld lug nuts too. Every couple of weeks I have to re-torque the fronts, I don't have this problem with the rears.
I torque to 85lbs.
Anyone have this problem?
Can I use thread locker on them?
I was in the process or ordering new rear brakes shoes from my 67 318 Satellite with an 8 3/4" rear. Apparently, the drums can be either 10" or 11".
Do I need to pull the wheels to find out? Or does someone know?
When I built my 318 engine I installed an Edelbrock performer intake, which is a spread-bore style intake. I then installed an Edelbrock square bore 650cfm carb. I had only installed a spacer but no adapter of any kind.
I was watching Derek Bieri revive an old 50 Chevy also with a spread bore...
Having a real problem with this rim. I believe it's a Drag Light? It's date stamped 12-04. They came on the car, so I have no history. Anyway, I was getting a weird grinding noise and taking a closer look at this rim, something seems to be wrong. Maybe I'm not getting a good seat to the...
67 Satellite, front drum brakes
I just replaced the outer bearings but I'm still getting noise.
To get to the inner bearings, does the brake assembly need to come off?
Any pictures?
67 Satellite automatic with floor console.
I just replaced my floor pans and I need to reposition the gas pedal and drill new holes in the floor.
Any suggestions?
No, I didn't measure the location of the pedal when I tool out the old one :rolleyes:
67 Satellite
I just purchased a radio from retro sound and I've been on the phone with them a few times trying to locate a correct faceplate for my 67.
The dash has a bulge so I'm thinking a specific faceplate is needed. Does the radio opening look altered?
Any suggestions?
1967 Satellite 2D hardtop.
This is what I know
From the inside I can lock the doors by pushing the button down and the doors stay locked.
When I push the lock button down and close the door the lock button pops up.
When I push the lock button down and close the door while...
1967 Satellite, I just installed a new under-dash harness from Year One. Fits very well. One question...
There are two, I think 12G, wires coming in, red and black coming to the back of the instrument panel, they attach with nuts.
One the instrument panel the red is labeled as POS or +12V...
I'm installing a new under-dash harness from YearOne, so far going well, but one question, there is a GRD pin on the ignition switch.
The harness doesn't seem to have a connector for the GRD pin all the other pins are there.
Can I just provide my own ground connector?
How do I remove these three wires from the motor (see arrow)? They seem to go inside the motor case.
I'm replacing the engine/lighting harness with a new one.
I am just now in the process of installing a Classic Auto Air system in my 67 Satellite, it was an AC car.
I just realized there is no option for fresh air intake, I called them and they basically said "yep" that's how it is.
I am disappointed, but maybe not a big deal?
Anyone have an...
67 Satellite, every time I open the door, I get a wiff of old car smell, and I love it. What am I smelling?
I get nothing memorable from my 2013 T&C or my 01 Dodge 1500.
This goes just above the steering column, matching chrome trim along the bottom of the dash.
Anyone know where to get one? Mine is cracked and JB weld isn't holding.
Problem: when the engine warms up, I get starter chatter when I turn the ignition to start the car
67 Satellite, rebuilt 318, 727 trans, go easy on me, wires and electricity are not my strong suit :)
Here are the facts, let's see if I can explain things well enough, this is driving me...
67 Satellite hardtop.
I just replaced the diver side window regulator and window felt. Now, the window doesn't want to roll all the way up, maybe 1/2" too short. When I crank the handle at that point it doesn't go any farther up and the crank handle starts to rotate making a clunking sound...