Pa's Sat
Active Member
I changed out the drum for disc brakes on front and kept the drums on the back. Got a new master cylinder with booster and portion valve setup from Classic. I bench bled the clyinder several times and the lines several times and still don't have good brakes. When first pushing the pedal down I feel some braking but as the pedal goes down it looses power and have to push very hard to get any braking. The pedal also does not pump up to a solid feel with the engine off. The vacum is 12-15 lbs.
After the brakes are working it is off to the body shop and then paint.
Any suggestions and help is needed and welcome. Thanks for all or any ideas.
After the brakes are working it is off to the body shop and then paint.
Any suggestions and help is needed and welcome. Thanks for all or any ideas.