- Local time
- 11:22 AM
- Joined
- Dec 25, 2011
- Messages
- 5,266
- Reaction score
- 6,354
- Location
- White Cloud, MI
Hi fellas,
I've welded half couplings and pipe plugged several housings with good results but on my NEW 65 Coronet I was thinking about drilling and tapping for a 1/8" plug. I do not want to weld on a greasy housing and bake a bunch of crud on the inside. Has anyone here tried the drill and tap scenario with success?
Thanks.
Mike
I've welded half couplings and pipe plugged several housings with good results but on my NEW 65 Coronet I was thinking about drilling and tapping for a 1/8" plug. I do not want to weld on a greasy housing and bake a bunch of crud on the inside. Has anyone here tried the drill and tap scenario with success?
Thanks.
Mike