K member, engine and tranny stand

[Beekeeper]

I will post up some pics and measurements
this weekend when i’m back in the shop

 

[rklewis1005]

I will post up some pics and measurements
this weekend when i’m back in the shop

That would be amazing!

 

[Beekeeper]

Here’s some pictures with measurements for the lifting attachment. The two pieces of 2 1/2” square tubing once drilled will need a 1/2” nut welded to them for securing the 1/2” bolt that holds the cross bar in place.
The rest of the tubing is 2” square thin wall also the 2 mounting holes for each side will need reinforcing tubing welded in place.

 

[Beekeeper]

the remaining pictures

 

[rklewis1005]

Thanks, that gives me the info I need. Much appreciated!

 

[A70Runner]

http://[URL]https://www.forabodiesonly.com/mopar/threads/built-me-a-new-tool.350813/

[/URL]

Thank you for the plans Beekeeper!! I just have to finish the piece on the front to steady the kframe.

 

[Runner 68]

I think Beekeeper needs to patent this thing and go into competition with US Car Tools.