Low oil pressure on run stand.

[khryslerkid]

Did you do a cam shaft/bearing/lifter inspection? Wash out all the oil galleys?

Change this oil and do a filter inspection?

 

[BeepBeepRR]

Checked the cam and bearings changed the oil and filter. Did not do anything other than that. Had no metal in the previous oil.

 

[Bicylindrico]

Curious how low was "low"? (sorry saw the post first say no oil pressure. Was looking for a number but assuming zero.)

 

[BeepBeepRR]

0 would be the answer. Initially the pump spun up and I was able to get oil to the rocker shafts. Dont ask me how it was able to do that with that plug missing.