wyrmrider
Well-Known Member
even with edm lifters
requires a pro level build
correct geometry
very stiff pushrods
etc
requires a pro level build
correct geometry
very stiff pushrods
etc
Lifters are in, all rise and fall under there own weight and rotate properly when cam is turned. So all good there. Teaching myself to degree the cam, seemed intimidating at first. Following the instructions provided by Hughes, I now have a good understanding of what to do. Is it common practice to only check cam on cylinder 1 or do all lobes need to be verified?
Is a cam button required with mechanical lifters?
Thanks in advance
View attachment 963779 View attachment 963781