The Roach

[themechanic]

Morris Classics sells these which look like the ones I had custom ordered from Seatbelt Planet.

Charger (Hardtop) Front 3-Point Seat Belts for Bucket Seats

Morris Classic offers front 3-point seat belts for 1968-73 Chargers that directly bolt into the factory locations and come with all necessary hardware. Classic Dodge Charger

www.morrisclassic.com

 

[Richard Cranium]

Morris Classics sells these which look like the ones I had custom ordered from Seatbelt Planet.

Charger (Hardtop) Front 3-Point Seat Belts for Bucket Seats

Morris Classic offers front 3-point seat belts for 1968-73 Chargers that directly bolt into the factory locations and come with all necessary hardware. Classic Dodge Charger

www.morrisclassic.com

Looks like the same retractors, but those are much better latches. If you talk with Seat Belt Planet, let us know what they say.

 

[qkcuda]

What brand and any pictures?

I bought my belts from Wesco. I initially tried to use the seatbelt bolt for the retractor and belt anchor. That didn't work so I made a bracket and installed the retractor in the rear foot well bolted through the double seam in the floor. It lined up directly under the roof mount and worked way better. I did not use a sash extension, but then again this was in an A body.

 

[themechanic]

I bought my belts from Wesco. I initially tried to use the seatbelt bolt for the retractor and belt anchor. That didn't work so I made a bracket and installed the retractor in the rear foot well bolted through the double seam in the floor. It lined up directly under the roof mount and worked way better. I did not use a sash extension, but then again this was in an A body.

View attachment 1873506

View attachment 1873507

The difference in A, B, and E bodies mounting points made at big difference in the function and fit.

 

[Richard Cranium]

I bought my belts from Wesco. I initially tried to use the seatbelt bolt for the retractor and belt anchor. That didn't work so I made a bracket and installed the retractor in the rear foot well bolted through the double seam in the floor. It lined up directly under the roof mount and worked way better. I did not use a sash extension, but then again this was in an A body.

View attachment 1873506

View attachment 1873507

Later on this week, when we're back home, I'm going to look into seeing how that might work out.

 

[qkcuda]

Here are a couple of photos of the bracket I made and how it attached through the floor.